2020 Toyota C-HR

2020 Toyota C-HR wheel fitment at a glance

This 2020 Toyota C-HR is running Rotiform LAS-R in 20x8.5 +35 at all four corners, wrapped in 245/40R20 tires.

It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota C-HR wheel fitment, Rotiform LAS-R on a Toyota C-HR, 20x8.5 +35 wheels on a C-HR, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rotiform LAS-R 20x8.5 +35 specs

The wheels are 20-inch in diameter and 8.5 inches wide with a +35 offset, in the 5x114.3 bolt pattern the Toyota C-HR uses.

A +35 offset on a 8.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Rotiform LAS-R 20x8.5 +35 on a Toyota C-HR is a common C-HR question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/40R20 tires on 20x8.5 wheels

The tire size is 245/40R20: a 245 mm section width with a 40 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Ironman IRON iMOVE Gen 3 AS 245/40ZR20XL at $127 each in 245/40R20, and more 245/40R20 tires through the tire search.

Searching for 245/40R20 tires on a Toyota C-HR, or the right tire size for 20x8.5 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Toyota C-HR while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota C-HR comes down to the offset and width above; copy them and you get the same result.

Will 20x8.5 +35 fit a Toyota C-HR?

Will Rotiform LAS-R 20x8.5 +35 fit a 2020 Toyota C-HR? This owner's answer is yes, on lowering springs, with no rubbing.

6 related builds run sizes like 20x8.5, 20x10, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Toyota C-HR: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota C-HR

We sell this exact wheel: Rotiform 1PC R143 LAS-R 5X114.3/5X120 20X8.5 +35 GLOSS SILVER is $308 each, about $1,232 for the set of four. Add tires on the product page and it ships as a mounted and balanced Toyota C-HR wheel and tire package with free shipping.

Financing is available on every set, and 2020 Toyota C-HR wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota C-HR and size before you order, and add your own ride once it is done so the next owner can see what fits.