2019 Toyota 4Runner

2019 Toyota 4Runner wheel fitment at a glance

This 2019 Toyota 4Runner is running Konig Countersteer Type X in 17x8 -10 at all four corners, wrapped in 295/70R17 tires.

It sits on stock suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Toyota 4Runner wheel fitment, Konig Countersteer Type X on a Toyota 4Runner, 17x8 -10 wheels on a 4Runner, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Konig Countersteer Type X 17x8 -10 specs

The wheels are 17-inch in diameter and 8 inches wide with a -10 offset.

A -10 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Konig Countersteer Type X 17x8 -10 on a Toyota 4Runner is a common 4Runner question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

295/70R17 tires on 17x8 wheels

The tire size is 295/70R17: a 295 mm section width with a 70 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Venom Power Swamp Thing A/T 295/70R17 at $248 each in 295/70R17, and more 295/70R17 tires through the tire search.

Searching for 295/70R17 tires on a Toyota 4Runner, or the right tire size for 17x8 -10 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Toyota 4Runner is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Toyota 4Runner comes down to the offset and width above; copy them and you get the same result.

Will 17x8 -10 fit a Toyota 4Runner?

Will Konig Countersteer Type X 17x8 -10 fit a 2019 Toyota 4Runner? This owner's answer is yes, with no rubbing.

6 other Toyota 4Runner builds in the gallery run sizes like 18x8, 20x9, 18x9, 17x8, 17x10, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Toyota 4Runner: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota 4Runner

Konig Countersteer Type X is not something we carry today. For the same look on your 4Runner, browse wheels that fit the 2019 Toyota 4Runner in 17-inch sizes near -10 offset; the Toyota 4Runner wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Toyota 4Runner wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota 4Runner and size before you order, and add your own ride once it is done so the next owner can see what fits.