2019 Honda CR-V

2019 Honda CR-V wheel fitment at a glance

This 2019 Honda CR-V is running TR MOTORSPORTS C4 in 18x8 +35 at all four corners, wrapped in 235/55R18 tires.

It sits on KYB with H&R springs lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Honda CR-V wheel fitment, TR MOTORSPORTS C4 on a Honda CR-V, 18x8 +35 wheels on a CR-V, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

TR MOTORSPORTS C4 18x8 +35 specs

The wheels are 18-inch in diameter and 8 inches wide with a +35 offset.

A +35 offset on a 8-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

TR MOTORSPORTS C4 18x8 +35 on a Honda CR-V is a common CR-V question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/55R18 tires on 18x8 wheels

The tire size is 235/55R18: a 235 mm section width with a 55 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Ironman IRON iMOVE Gen 3 AS 235/55R18 at $113 each in 235/55R18, and more 235/55R18 tires through the tire search.

Searching for 235/55R18 tires on a Honda CR-V, or the right tire size for 18x8 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from KYB with H&R springs lowering springs, the simplest way to close the fender gap on a Honda CR-V while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Honda CR-V comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +35 fit a Honda CR-V?

Will TR MOTORSPORTS C4 18x8 +35 fit a 2019 Honda CR-V? This owner's answer is yes, on KYB with H&R springs lowering springs, with no rubbing.

6 other Honda CR-V builds in the gallery run sizes like 20x8.5, 16x7, 18x8, 17x8, so you can compare offsets, tire sizes and suspension before you order. See all Honda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Honda CR-V: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Honda CR-V

TR MOTORSPORTS C4 is not something we carry today. For the same look on your CR-V, browse wheels that fit the 2019 Honda CR-V in 18-inch sizes near +35 offset; the Honda CR-V wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Honda CR-V wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Honda CR-V and size before you order, and add your own ride once it is done so the next owner can see what fits.