2020 Toyota GR Supra

2020 Toyota GR Supra wheel fitment at a glance

This 2020 Toyota GR Supra is running Forgeline GS1R, staggered: 18x10 +32 up front and 18x11 +32 in the rear, wrapped in 255/40R18 Toyo Proxes Sport A/S tires.

It sits on H&R Springs lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota GR Supra wheel fitment, Forgeline GS1R on a Toyota GR Supra, 18x10 +32 wheels on a GR Supra, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgeline GS1R 18x10 +32 specs (staggered)

The wheels are 18-inch in diameter and 10 inches wide with a +32 offset up front, and 18-inch by 11 inches at +32 in the rear.

A +32 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +32 offset on the 11-inch wheel keeps the rear in line with the front.

Forgeline GS1R 18x10 +32 on a Toyota GR Supra is a common GR Supra question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/40R18 tires on 18x10 wheels

The tire size is 255/40R18: a 255 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Toyo Proxes Sport A/S. We stock Lexani LX-TWENTY 255/40R18 at $104 each in this size, and other 255/40R18 tires through the 255/40R18 tire search.

Searching for 255/40R18 tires on a Toyota GR Supra, or the right tire size for 18x10 +32 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R Springs lowering springs, the simplest way to close the fender gap on a Toyota GR Supra while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota GR Supra comes down to the offset and width above; copy them and you get the same result.

Will 18x10 +32 fit a Toyota GR Supra?

Will Forgeline GS1R 18x10 +32 fit a 2020 Toyota GR Supra? This owner's answer is yes, on H&R Springs lowering springs, with no rubbing.

6 other Toyota GR Supra builds in the gallery run sizes like 19x9.5 / 19x10.5, 19x9.5 / 19x11, 19x10.5 / 19x11.5, 19x9 / 20x10.5, 20x10 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Toyota GR Supra: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota GR Supra

Forgeline GS1R is not something we carry today. For the same look on your GR Supra, browse wheels that fit the 2020 Toyota GR Supra in 18-inch sizes near +32 offset; the Toyota GR Supra wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2020 Toyota GR Supra wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota GR Supra and size before you order, and add your own ride once it is done so the next owner can see what fits.