2011 INFINITI G25

2011 INFINITI G25 wheel fitment at a glance

This 2011 INFINITI G25 is running Work T7R in 19x9.5 +25 at all four corners, wrapped in 255/40R19 tires.

It sits on Lowered on Eibach ProKit with SPC camber kits lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for INFINITI G25 wheel fitment, Work T7R on a INFINITI G25, 19x9.5 +25 wheels on a G25, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work T7R 19x9.5 +25 specs

The wheels are 19-inch in diameter and 9.5 inches wide with a +25 offset, in the 5x100 bolt pattern the INFINITI G25 uses.

A +25 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work T7R 19x9.5 +25 on a INFINITI G25 is a common G25 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/40R19 tires on 19x9.5 wheels

The tire size is 255/40R19: a 255 mm section width with a 40 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Lexani LX-TWENTY 255/40R19 at $138 each in 255/40R19, and more 255/40R19 tires through the tire search.

Searching for 255/40R19 tires on a INFINITI G25, or the right tire size for 19x9.5 +25 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from Lowered on Eibach ProKit with SPC camber kits lowering springs, the simplest way to close the fender gap on a INFINITI G25 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a INFINITI G25 comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +25 fit a INFINITI G25?

Will Work T7R 19x9.5 +25 fit a 2011 INFINITI G25? This owner's answer is yes, on Lowered on Eibach ProKit with SPC camber kits lowering springs, with no rubbing.

6 other INFINITI G25 builds in the gallery run sizes like 19x8.5 / 19x10, 19x9.5 / 19x10.5, 19x9.5, 20x9.5 / 20x10.5, 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2011 INFINITI G25: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI G25

We sell this wheel in the closest size we carry: Work T7r 2P 5x100 19x9.5 +22 WHITE is $815 each, about $3,260 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced INFINITI G25 wheel and tire package with free shipping.

Financing is available on every set, and 2011 INFINITI G25 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI G25 and size before you order, and add your own ride once it is done so the next owner can see what fits.