2011 Nissan Cube

2011 Nissan Cube wheel fitment at a glance

This 2011 Nissan Cube is running Tenzo R Meister Version 2 in 17x7.5 +42 at all four corners, wrapped in 205/45R17 tires.

It sits on KSport Kontrol coilovers coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Nissan Cube wheel fitment, Tenzo R Meister Version 2 on a Nissan Cube, 17x7.5 +42 wheels on a Cube, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Tenzo R Meister Version 2 17x7.5 +42 specs

The wheels are 17-inch in diameter and 7.5 inches wide with a +42 offset.

A +42 offset on a 7.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Tenzo R Meister Version 2 17x7.5 +42 on a Nissan Cube is a common Cube question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

205/45R17 tires on 17x7.5 wheels

The tire size is 205/45R17: a 205 mm section width with a 45 aspect ratio on the 17-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Lexani LXUHP-207 205/45R17 at $82 each in 205/45R17, and more 205/45R17 tires through the tire search.

Searching for 205/45R17 tires on a Nissan Cube, or the right tire size for 17x7.5 +42 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on KSport Kontrol coilovers coilovers, which lets the owner dial in ride height and camber to clear 17x7.5 +42 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Nissan Cube comes down to the offset and width above; copy them and you get the same result.

Will 17x7.5 +42 fit a Nissan Cube?

Will Tenzo R Meister Version 2 17x7.5 +42 fit a 2011 Nissan Cube? This owner's answer is yes, on KSport Kontrol coilovers coilovers, with no rubbing.

1 other Nissan Cube build in the gallery runs sizes like 15x7, 17x7.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2011 Nissan Cube: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan Cube

Tenzo R Meister Version 2 is not something we carry today. For the same look on your Cube, browse wheels that fit the 2011 Nissan Cube in 17-inch sizes near +42 offset; the Nissan Cube wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2011 Nissan Cube wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan Cube and size before you order, and add your own ride once it is done so the next owner can see what fits.