2013 Hyundai Elantra Coupe

2013 Hyundai Elantra Coupe wheel fitment at a glance

This 2013 Hyundai Elantra Coupe is running MSR Type 044 in 18x8 +45 at all four corners, wrapped in 225/40R18 tires.

It sits on stock suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Hyundai Elantra Coupe wheel fitment, MSR Type 044 on a Hyundai Elantra Coupe, 18x8 +45 wheels on a Elantra Coupe, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

MSR Type 044 18x8 +45 specs

The wheels are 18-inch in diameter and 8 inches wide with a +45 offset.

A +45 offset on a 8-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.

MSR Type 044 18x8 +45 on a Hyundai Elantra Coupe is a common Elantra Coupe question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/40R18 tires on 18x8 wheels

The tire size is 225/40R18: a 225 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Ironman IRON iMOVE Gen 3 AS 225/40ZR18XL at $89 each in 225/40R18, and more 225/40R18 tires through the tire search.

Searching for 225/40R18 tires on a Hyundai Elantra Coupe, or the right tire size for 18x8 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Hyundai Elantra Coupe is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Hyundai Elantra Coupe comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +45 fit a Hyundai Elantra Coupe?

Will MSR Type 044 18x8 +45 fit a 2013 Hyundai Elantra Coupe? This owner's answer is yes, with no rubbing.

6 related builds run sizes like 18x8, so you can compare offsets, tire sizes and suspension before you order. See all Hyundai builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2013 Hyundai Elantra Coupe: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Hyundai Elantra Coupe

MSR Type 044 is not something we carry today. For the same look on your Elantra Coupe, browse wheels that fit the 2013 Hyundai Elantra Coupe in 18-inch sizes near +45 offset; the Hyundai Elantra Coupe wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2013 Hyundai Elantra Coupe wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Hyundai Elantra Coupe and size before you order, and add your own ride once it is done so the next owner can see what fits.