2018 Toyota Mirai

2018 Toyota Mirai wheel fitment at a glance

This 2018 Toyota Mirai is running Enkei NT03 in 18x9.5 +40 at all four corners, wrapped in 235/40R18 tires.

It sits on RSR Super Down Springs lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Toyota Mirai wheel fitment, Enkei NT03 on a Toyota Mirai, 18x9.5 +40 wheels on a Mirai, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Enkei NT03 18x9.5 +40 specs

The wheels are 18-inch in diameter and 9.5 inches wide with a +40 offset, in the 5x108 bolt pattern the Toyota Mirai uses.

A +40 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Enkei NT03 18x9.5 +40 on a Toyota Mirai is a common Mirai question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/40R18 tires on 18x9.5 wheels

The tire size is 235/40R18: a 235 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

We stock Lexani LXUHP-207 235/40R18 at $86 each in 235/40R18, and more 235/40R18 tires through the tire search.

Searching for 235/40R18 tires on a Toyota Mirai, or the right tire size for 18x9.5 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from RSR Super Down Springs lowering springs, the simplest way to close the fender gap on a Toyota Mirai while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Toyota Mirai comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +40 fit a Toyota Mirai?

Will Enkei NT03 18x9.5 +40 fit a 2018 Toyota Mirai? This owner's answer is yes, on RSR Super Down Springs lowering springs, with no rubbing.

6 other Toyota Mirai builds in the gallery run sizes like 19x8, 18x8, 22x10.5, 20x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2018 Toyota Mirai: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota Mirai

We sell this exact wheel: Enkei NT03+M 5x108 18x9.5+40 F1 Silver is $365 each, about $1,458 for the set of four, in stock and ready to ship. Add tires on the product page and it ships as a mounted and balanced Toyota Mirai wheel and tire package with free shipping.

Financing is available on every set, and 2018 Toyota Mirai wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Mirai and size before you order, and add your own ride once it is done so the next owner can see what fits.