2016 Mercedes-Benz CLA250

2016 Mercedes-Benz CLA250 wheel fitment at a glance

This 2016 Mercedes-Benz CLA250 is running AG M621, staggered: 18x8 +48 up front and 19x8.5 +45 in the rear, wrapped in 235/40R18 front and 235/35R19 rear tires.

It sits on lowering springs with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Mercedes-Benz CLA250 wheel fitment, AG M621 on a Mercedes-Benz CLA250, 18x8 +48 wheels on a CLA250, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

AG M621 18x8 +48 specs (staggered)

The wheels are 18-inch in diameter and 8 inches wide with a +48 offset up front, and 19-inch by 8.5 inches at +45 in the rear.

A +48 offset on a 8-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +45 offset on the 8.5-inch wheel pushes the rear out further for the staggered look.

AG M621 18x8 +48 on a Mercedes-Benz CLA250 is a common CLA250 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/40R18 / 235/35R19 tires on 18x8 wheels

The tire size is 235/40R18 front and 235/35R19 rear: a 235 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Lexani LXUHP-207 235/40R18 at $86 each in 235/40R18, and more 235/40R18 tires through the tire search.

Searching for 235/40R18 tires on a Mercedes-Benz CLA250, or the right tire size for 18x8 +48 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Mercedes-Benz CLA250 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Mercedes-Benz CLA250 comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +48 fit a Mercedes-Benz CLA250?

Will AG M621 18x8 +48 fit a 2016 Mercedes-Benz CLA250? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Mercedes-Benz CLA250 builds in the gallery run sizes like 19x8.5, 19x8.5 / 19x9.5, 18x8 / 19x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Mercedes-Benz builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 Mercedes-Benz CLA250: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mercedes-Benz CLA250

AG M621 is not something we carry today. For the same look on your CLA250, browse wheels that fit the 2016 Mercedes-Benz CLA250 in 18-inch sizes near +48 offset; the Mercedes-Benz CLA250 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 Mercedes-Benz CLA250 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mercedes-Benz CLA250 and size before you order, and add your own ride once it is done so the next owner can see what fits.