2016 Chevrolet Cruze

2016 Chevrolet Cruze wheel fitment at a glance

This 2016 Chevrolet Cruze is running Chevrolet Corvette Sawblade in 17x8.5 +56 at all four corners, wrapped in 215/40R17 tires.

It sits on stock suspension with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Chevrolet Cruze wheel fitment, Chevrolet Corvette Sawblade on a Chevrolet Cruze, 17x8.5 +56 wheels on a Cruze, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Chevrolet Corvette Sawblade 17x8.5 +56 specs

The wheels are 17-inch in diameter and 8.5 inches wide with a +56 offset.

A +56 offset on a 8.5-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.

Chevrolet Corvette Sawblade 17x8.5 +56 on a Chevrolet Cruze is a common Cruze question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/40R17 tires on 17x8.5 wheels

The tire size is 215/40R17: a 215 mm section width with a 40 aspect ratio on the 17-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Accelera ALPHA 215/40R17 87W - 1200000074 at $74 each in 215/40R17, and more 215/40R17 tires through the tire search.

Searching for 215/40R17 tires on a Chevrolet Cruze, or the right tire size for 17x8.5 +56 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Chevrolet Cruze is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Chevrolet Cruze comes down to the offset and width above; copy them and you get the same result.

Will 17x8.5 +56 fit a Chevrolet Cruze?

Will Chevrolet Corvette Sawblade 17x8.5 +56 fit a 2016 Chevrolet Cruze? This owner's answer is yes, with no rubbing.

6 other Chevrolet Cruze builds in the gallery run sizes like 18x9.5, 18x8, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 Chevrolet Cruze: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Cruze

Chevrolet Corvette Sawblade is not something we carry today. For the same look on your Cruze, browse wheels that fit the 2016 Chevrolet Cruze in 17-inch sizes near +56 offset; the Chevrolet Cruze wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 Chevrolet Cruze wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Cruze and size before you order, and add your own ride once it is done so the next owner can see what fits.