2017 Mitsubishi Lancer

2017 Mitsubishi Lancer wheel fitment at a glance

This 2017 Mitsubishi Lancer is running Enkei GTC, staggered: 18x9.5 +38 up front and 18x10 +22 in the rear, wrapped in 245/40R18 tires.

It sits on stock suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Mitsubishi Lancer wheel fitment, Enkei GTC on a Mitsubishi Lancer, 18x9.5 +38 wheels on a Lancer, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Enkei GTC 18x9.5 +38 specs (staggered)

The wheels are 18-inch in diameter and 9.5 inches wide with a +38 offset up front, and 18-inch by 10 inches at +22 in the rear, in the 5x114.3 bolt pattern the Mitsubishi Lancer uses.

A +38 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +22 offset on the 10-inch wheel pushes the rear out further for the staggered look.

Enkei GTC 18x9.5 +38 on a Mitsubishi Lancer is a common Lancer question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/40R18 tires on 18x9.5 wheels

The tire size is 245/40R18: a 245 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Ironman IRON iMOVE Gen 3 AS 245/40ZR18XL at $101 each in 245/40R18, and more 245/40R18 tires through the tire search.

Searching for 245/40R18 tires on a Mitsubishi Lancer, or the right tire size for 18x9.5 +38 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mitsubishi Lancer is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Mitsubishi Lancer comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +38 fit a Mitsubishi Lancer?

Will Enkei GTC 18x9.5 +38 fit a 2017 Mitsubishi Lancer? This owner's answer is yes, with no rubbing.

6 other Mitsubishi Lancer builds in the gallery run sizes like 18x9.5, 18x8.5, 18x8.75, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Mitsubishi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2017 Mitsubishi Lancer: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mitsubishi Lancer

We sell this exact wheel: Enkei GTC02 5x114.3 18x9.5+40 Matte Black is $544 each, about $2,367 for the set of four. Add tires on the product page and it ships as a mounted and balanced Mitsubishi Lancer wheel and tire package with free shipping.

Financing is available on every set, and 2017 Mitsubishi Lancer wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mitsubishi Lancer and size before you order, and add your own ride once it is done so the next owner can see what fits.