2016 INFINITI Q70

2016 INFINITI Q70 wheel fitment at a glance

This 2016 INFINITI Q70 is running Forgeline MD3P, staggered: 19x9.5 +40 up front and 19x10.5 +45 in the rear, wrapped in 245/40R19 front and 285/35R19 rear tires.

It sits on Swift Springs lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for INFINITI Q70 wheel fitment, Forgeline MD3P on a INFINITI Q70, 19x9.5 +40 wheels on a Q70, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgeline MD3P 19x9.5 +40 specs (staggered)

The wheels are 19-inch in diameter and 9.5 inches wide with a +40 offset up front, and 19-inch by 10.5 inches at +45 in the rear.

A +40 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +45 offset on the 10.5-inch wheel keeps the rear in line with the front.

Forgeline MD3P 19x9.5 +40 on a INFINITI Q70 is a common Q70 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/40R19 / 285/35R19 tires on 19x9.5 wheels

The tire size is 245/40R19 front and 285/35R19 rear: a 245 mm section width with a 40 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Arroyo Grand Sport AS 245/40ZR19 at $111 each in 245/40R19, and more 245/40R19 tires through the tire search.

Searching for 245/40R19 tires on a INFINITI Q70, or the right tire size for 19x9.5 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from Swift Springs lowering springs, the simplest way to close the fender gap on a INFINITI Q70 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a INFINITI Q70 comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +40 fit a INFINITI Q70?

Will Forgeline MD3P 19x9.5 +40 fit a 2016 INFINITI Q70? This owner's answer is yes, on Swift Springs lowering springs, with no rubbing.

6 other INFINITI Q70 builds in the gallery run sizes like 19x8.5 / 19x10, 19x9.5, 19x9 / 19x10, 20x9.5 / 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 INFINITI Q70: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI Q70

Forgeline MD3P is not something we carry today. For the same look on your Q70, browse wheels that fit the 2016 INFINITI Q70 in 19-inch sizes near +40 offset; the INFINITI Q70 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 INFINITI Q70 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI Q70 and size before you order, and add your own ride once it is done so the next owner can see what fits.