2019 Volkswagen Jetta

2019 Volkswagen Jetta wheel fitment at a glance

This 2019 Volkswagen Jetta is running Rotiform LSR in 19x8.5 +45 at all four corners, wrapped in 245/40R19 tires.

It sits on H&R OE model Springs (MK7 GTi, 0.75" drop) lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Volkswagen Jetta wheel fitment, Rotiform LSR on a Volkswagen Jetta, 19x8.5 +45 wheels on a Jetta, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rotiform LSR 19x8.5 +45 specs

The wheels are 19-inch in diameter and 8.5 inches wide with a +45 offset, in the 5x112 bolt pattern the Volkswagen Jetta uses.

A +45 offset on a 8.5-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.

Rotiform LSR 19x8.5 +45 on a Volkswagen Jetta is a common Jetta question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/40R19 tires on 19x8.5 wheels

The tire size is 245/40R19: a 245 mm section width with a 40 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Lexani LX-TWENTY 245/40R19 at $112 each in 245/40R19, and more 245/40R19 tires through the tire search.

Searching for 245/40R19 tires on a Volkswagen Jetta, or the right tire size for 19x8.5 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R OE model Springs (MK7 GTi, 0.75" drop) lowering springs, the simplest way to close the fender gap on a Volkswagen Jetta while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Volkswagen Jetta comes down to the offset and width above; copy them and you get the same result.

Will 19x8.5 +45 fit a Volkswagen Jetta?

Will Rotiform LSR 19x8.5 +45 fit a 2019 Volkswagen Jetta? This owner's answer is yes, on H&R OE model Springs (MK7 GTi, 0.75" drop) lowering springs, with no rubbing.

6 other Volkswagen Jetta builds in the gallery run sizes like 17x10.5, 18x9.5, 18x9, 19x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Volkswagen builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Volkswagen Jetta: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Volkswagen Jetta

We sell this exact wheel: Rotiform 1PC R156 LSR 5X112 19X8.5 +45 MATTE GOLD MACHINED is $344 each, about $1,376 for the set of four. Add tires on the product page and it ships as a mounted and balanced Volkswagen Jetta wheel and tire package with free shipping.

Financing is available on every set, and 2019 Volkswagen Jetta wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Volkswagen Jetta and size before you order, and add your own ride once it is done so the next owner can see what fits.