2019 Nissan Maxima

2019 Nissan Maxima wheel fitment at a glance

This 2019 Nissan Maxima is running Konig Crosshairs in 18x8 +40 at all four corners, wrapped in 245/45R18 tires.

It sits on H&R lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Nissan Maxima wheel fitment, Konig Crosshairs on a Nissan Maxima, 18x8 +40 wheels on a Maxima, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Konig Crosshairs 18x8 +40 specs

The wheels are 18-inch in diameter and 8 inches wide with a +40 offset.

A +40 offset on a 8-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Konig Crosshairs 18x8 +40 on a Nissan Maxima is a common Maxima question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/45R18 tires on 18x8 wheels

The tire size is 245/45R18: a 245 mm section width with a 45 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Ironman IRON iMOVE Gen 3 AS 245/45ZR18XL at $105 each in 245/45R18, and more 245/45R18 tires through the tire search.

Searching for 245/45R18 tires on a Nissan Maxima, or the right tire size for 18x8 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R lowering springs, the simplest way to close the fender gap on a Nissan Maxima while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Nissan Maxima comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +40 fit a Nissan Maxima?

Will Konig Crosshairs 18x8 +40 fit a 2019 Nissan Maxima? This owner's answer is yes, on H&R lowering springs, with no rubbing.

6 other Nissan Maxima builds in the gallery run sizes like 20x9 / 20x10, 20x9 / 20x11, 17x8, 18x8, 20x8.5 / 20x9.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Nissan Maxima: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan Maxima

Konig Crosshairs is not something we carry today. For the same look on your Maxima, browse wheels that fit the 2019 Nissan Maxima in 18-inch sizes near +40 offset; the Nissan Maxima wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Nissan Maxima wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan Maxima and size before you order, and add your own ride once it is done so the next owner can see what fits.