2020 Toyota Tundra

2020 Toyota Tundra wheel fitment at a glance

This 2020 Toyota Tundra is running XF-Forged Xfx-301 in Brushed in 22x12 -44 at all four corners, wrapped in 325/50R22 Fuel Gripper A/T tires.

It sits on lift kit with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota Tundra wheel fitment, XF-Forged Xfx-301 on a Toyota Tundra, 22x12 -44 wheels on a Tundra, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

XF-Forged Xfx-301 22x12 -44 specs

The wheels are 22-inch in diameter and 12 inches wide with a -44 offset.

A -44 offset on a 12-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

XF-Forged Xfx-301 22x12 -44 on a Toyota Tundra is a common Tundra question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

325/50R22 tires on 22x12 wheels

The tire size is 325/50R22: a 325 mm section width with a 50 aspect ratio on the 22-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Fuel Gripper A/T. We stock AMP Terrain Attack M/T LT325/50R22 at $459 each in this size, and other 325/50R22 tires through the 325/50R22 tire search.

Searching for 325/50R22 tires on a Toyota Tundra, or the right tire size for 22x12 -44 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The truck is lifted with lift kit, which is what makes room for the 325/50R22 tires without trimming.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota Tundra comes down to the offset and width above; copy them and you get the same result.

Will 22x12 -44 fit a Toyota Tundra?

Will XF-Forged Xfx-301 22x12 -44 fit a 2020 Toyota Tundra? This owner's answer is yes, on lift kit, with no rubbing.

6 other Toyota Tundra builds in the gallery run sizes like 24x12, 20x10, 17x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Toyota Tundra: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota Tundra

XF-Forged Xfx-301 is not something we carry today. For the same look on your Tundra, browse wheels that fit the 2020 Toyota Tundra in 22-inch sizes near -44 offset; the Toyota Tundra wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2020 Toyota Tundra wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Tundra and size before you order, and add your own ride once it is done so the next owner can see what fits.