2020 Toyota Tundra

2020 Toyota Tundra wheel fitment at a glance

This 2020 Toyota Tundra is running Level-8 Hauler in Matte Black in 18x9 +12 at all four corners, wrapped in 315/60R18 Nitto Ridge Grappler tires.

It sits on lift kit with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota Tundra wheel fitment, Level-8 Hauler on a Toyota Tundra, 18x9 +12 wheels on a Tundra, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Level-8 Hauler 18x9 +12 specs

The wheels are 18-inch in diameter and 9 inches wide with a +12 offset.

A +12 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Level-8 Hauler 18x9 +12 on a Toyota Tundra is a common Tundra question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

315/60R18 tires on 18x9 wheels

The tire size is 315/60R18: a 315 mm section width with a 60 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Nitto Ridge Grappler. See every 315/60R18 tire we carry for this size.

Searching for 315/60R18 tires on a Toyota Tundra, or the right tire size for 18x9 +12 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The truck is lifted with lift kit, which is what makes room for the 315/60R18 tires without trimming.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota Tundra comes down to the offset and width above; copy them and you get the same result.

Will 18x9 +12 fit a Toyota Tundra?

Will Level-8 Hauler 18x9 +12 fit a 2020 Toyota Tundra? This owner's answer is yes, on lift kit, with no rubbing.

6 other Toyota Tundra builds in the gallery run sizes like 24x12, 20x10, 17x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Toyota Tundra: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota Tundra

Level-8 Hauler is not something we carry today. For the same look on your Tundra, browse wheels that fit the 2020 Toyota Tundra in 18-inch sizes near +12 offset; the Toyota Tundra wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2020 Toyota Tundra wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Tundra and size before you order, and add your own ride once it is done so the next owner can see what fits.