2017 INFINITI Q60

2017 INFINITI Q60 wheel fitment at a glance

This 2017 INFINITI Q60 is running Work Wheels Meister S1 3P in 20x12 -14 at all four corners, wrapped in 285/30R20 Toyo Proxes Sport tires.

It sits on Air Lift Performance air suspension with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for INFINITI Q60 wheel fitment, Work Wheels Meister S1 3P on a INFINITI Q60, 20x12 -14 wheels on a Q60, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister S1 3P 20x12 -14 specs

The wheels are 20-inch in diameter and 12 inches wide with a -14 offset, in the 5x100 bolt pattern the INFINITI Q60 uses.

A -14 offset on a 12-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels Meister S1 3P 20x12 -14 on a INFINITI Q60 is a common Q60 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

285/30R20 tires on 20x12 wheels

The tire size is 285/30R20: a 285 mm section width with a 30 aspect ratio on the 20-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Toyo Proxes Sport. We stock Lionhart LH-Five 285/30R20 99W - LHST52030090 at $138 each in this size, and other 285/30R20 tires through the 285/30R20 tire search.

Searching for 285/30R20 tires on a INFINITI Q60, or the right tire size for 20x12 -14 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Air Lift Performance air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, no spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a INFINITI Q60 comes down to the offset and width above; copy them and you get the same result.

Will 20x12 -14 fit a INFINITI Q60?

Will Work Wheels Meister S1 3P 20x12 -14 fit a 2017 INFINITI Q60? This owner's answer is yes, on Air Lift Performance air suspension, with no rubbing.

6 other INFINITI Q60 builds in the gallery run sizes like 20x8.5 / 20x10, 20x9.5 / 20x11, 19x9.5, 20x10, 20x9, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2017 INFINITI Q60: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI Q60

We carry Work Wheels Meister S1 3P, though not yet in 20x12 -14: see the Work Wheels Meister S1 3P sizes we stock, or every wheel that fits the 2017 INFINITI Q60 in sizes close to this one.

Financing is available on every set, and 2017 INFINITI Q60 wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @Cambo_q60. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI Q60 and size before you order, and add your own ride once it is done so the next owner can see what fits.