2018 Chevrolet Corvette

2018 Chevrolet Corvette wheel fitment at a glance

This 2018 Chevrolet Corvette is running Vertini RFS1.2, staggered: 19x10 +30 up front and 20x12 +46 in the rear, wrapped in 275/30R19 front and 325/25R20 rear Michelin Pilot Sport 4 tires.

It sits on lowering springs with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Chevrolet Corvette wheel fitment, Vertini RFS1.2 on a Chevrolet Corvette, 19x10 +30 wheels on a Corvette, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Vertini RFS1.2 19x10 +30 specs (staggered)

The wheels are 19-inch in diameter and 10 inches wide with a +30 offset up front, and 20-inch by 12 inches at +46 in the rear.

A +30 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +46 offset on the 12-inch wheel keeps the rear in line with the front.

Vertini RFS1.2 19x10 +30 on a Chevrolet Corvette is a common Corvette question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

275/30R19 / 325/25R20 tires on 19x10 wheels

The tire size is 275/30R19 front and 325/25R20 rear: a 275 mm section width with a 30 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Michelin Pilot Sport 4. We stock Arroyo Grand Sport AS 275/30ZR19 at $126 each in this size, and other 275/30R19 tires through the 275/30R19 tire search.

Searching for 275/30R19 tires on a Chevrolet Corvette, or the right tire size for 19x10 +30 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Chevrolet Corvette while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Chevrolet Corvette comes down to the offset and width above; copy them and you get the same result.

Will 19x10 +30 fit a Chevrolet Corvette?

Will Vertini RFS1.2 19x10 +30 fit a 2018 Chevrolet Corvette? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Chevrolet Corvette builds in the gallery run sizes like 18x9 / 19x10.5, 19x11 / 19x12.5, 18x9.5, 19x10.5 / 20x13, 19x9.5 / 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2018 Chevrolet Corvette: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Corvette

Vertini RFS1.2 is not something we carry today. For the same look on your Corvette, browse wheels that fit the 2018 Chevrolet Corvette in 19-inch sizes near +30 offset; the Chevrolet Corvette wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2018 Chevrolet Corvette wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Corvette and size before you order, and add your own ride once it is done so the next owner can see what fits.