2012 Chevrolet Corvette

2012 Chevrolet Corvette wheel fitment at a glance

This 2012 Chevrolet Corvette is running Forgeline GS1R Beadlock, staggered: 17x10 +40 up front and 17x10 +50 in the rear, wrapped in 245/35R17 front and 185/55R17 rear Michelin Pilot Sport 4 S tires.

It sits on stock suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Chevrolet Corvette wheel fitment, Forgeline GS1R Beadlock on a Chevrolet Corvette, 17x10 +40 wheels on a Corvette, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgeline GS1R Beadlock 17x10 +40 specs (staggered)

The wheels are 17-inch in diameter and 10 inches wide with a +40 offset up front, and 17-inch by 10 inches at +50 in the rear.

A +40 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +50 offset on the 10-inch wheel keeps the rear in line with the front.

Forgeline GS1R Beadlock 17x10 +40 on a Chevrolet Corvette is a common Corvette question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/35R17 / 185/55R17 tires on 17x10 wheels

The tire size is 245/35R17 front and 185/55R17 rear: a 245 mm section width with a 35 aspect ratio on the 17-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Michelin Pilot Sport 4 S. See every 245/35R17 tire we carry for this size.

Searching for 245/35R17 tires on a Chevrolet Corvette, or the right tire size for 17x10 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Chevrolet Corvette is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Chevrolet Corvette comes down to the offset and width above; copy them and you get the same result.

Will 17x10 +40 fit a Chevrolet Corvette?

Will Forgeline GS1R Beadlock 17x10 +40 fit a 2012 Chevrolet Corvette? This owner's answer is yes, with no rubbing.

6 other Chevrolet Corvette builds in the gallery run sizes like 18x9 / 19x10.5, 19x11 / 19x12.5, 18x9.5, 19x10.5 / 20x13, 19x9.5 / 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2012 Chevrolet Corvette: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Corvette

Forgeline GS1R Beadlock is not something we carry today. For the same look on your Corvette, browse wheels that fit the 2012 Chevrolet Corvette in 17-inch sizes near +40 offset; the Chevrolet Corvette wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2012 Chevrolet Corvette wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Corvette and size before you order, and add your own ride once it is done so the next owner can see what fits.