2000 Chevrolet Corvette

2000 Chevrolet Corvette wheel fitment at a glance

This 2000 Chevrolet Corvette is running Avus Wheels Rims Custom 1, staggered: 19x10 +40 up front and 20x13 +59 in the rear, wrapped in 255/35R19 front and 345/30R20 rear Nitto Invo tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Chevrolet Corvette wheel fitment, Avus Wheels Rims Custom 1 on a Chevrolet Corvette, 19x10 +40 wheels on a Corvette, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Avus Wheels Rims Custom 1 19x10 +40 specs (staggered)

The wheels are 19-inch in diameter and 10 inches wide with a +40 offset up front, and 20-inch by 13 inches at +59 in the rear.

A +40 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +59 offset on the 13-inch wheel keeps the rear in line with the front.

Avus Wheels Rims Custom 1 19x10 +40 on a Chevrolet Corvette is a common Corvette question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R19 / 345/30R20 tires on 19x10 wheels

The tire size is 255/35R19 front and 345/30R20 rear: a 255 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Nitto Invo. We stock Ironman IRON iMOVE Gen 3 AS 255/35ZR19XL at $124 each in this size, and other 255/35R19 tires through the 255/35R19 tire search.

Searching for 255/35R19 tires on a Chevrolet Corvette, or the right tire size for 19x10 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x10 +40 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Chevrolet Corvette comes down to the offset and width above; copy them and you get the same result.

Will 19x10 +40 fit a Chevrolet Corvette?

Will Avus Wheels Rims Custom 1 19x10 +40 fit a 2000 Chevrolet Corvette? This owner's answer is yes, on coilovers, with no rubbing.

6 other Chevrolet Corvette builds in the gallery run sizes like 18x9 / 19x10.5, 19x11 / 19x12.5, 18x9.5, 19x10.5 / 20x13, 19x9.5 / 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2000 Chevrolet Corvette: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Corvette

Avus Wheels Rims Custom 1 is not something we carry today. For the same look on your Corvette, browse wheels that fit the 2000 Chevrolet Corvette in 19-inch sizes near +40 offset; the Chevrolet Corvette wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2000 Chevrolet Corvette wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Corvette and size before you order, and add your own ride once it is done so the next owner can see what fits.