2001 Mitsubishi Mirage

2001 Mitsubishi Mirage wheel fitment at a glance

This 2001 Mitsubishi Mirage is running Work Wheels Meister M1 3P in 16x8 -5 at all four corners, wrapped in 195/45R16 Westlake SA07 Sport A/S tires.

It sits on Airtekk air suspension with a hellaflush stance, meaning the wheel face sits at or just past the fender, the most aggressive look.

If you are searching for Mitsubishi Mirage wheel fitment, Work Wheels Meister M1 3P on a Mitsubishi Mirage, 16x8 -5 wheels on a Mirage, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister M1 3P 16x8 -5 specs

The wheels are 16-inch in diameter and 8 inches wide with a -5 offset, in the 4x100 bolt pattern the Mitsubishi Mirage uses.

A -5 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels Meister M1 3P 16x8 -5 on a Mitsubishi Mirage is a common Mirage question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

195/45R16 tires on 16x8 wheels

The tire size is 195/45R16: a 195 mm section width with a 45 aspect ratio on the 16-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Westlake SA07 Sport A/S. We stock Nexen NEX N'Fera SU1 195/45ZR16 at $150 each in this size, and other 195/45R16 tires through the 195/45R16 tire search.

Searching for 195/45R16 tires on a Mitsubishi Mirage, or the right tire size for 16x8 -5 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Airtekk air suspension, so it can lay low parked and raise up to drive.

A slight rub at full lock, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: hellaflush. The wheel face sits at or just past the fender, the most aggressive look. Flush fitment on a Mitsubishi Mirage comes down to the offset and width above; copy them and you get the same result.

Will 16x8 -5 fit a Mitsubishi Mirage?

Will Work Wheels Meister M1 3P 16x8 -5 fit a 2001 Mitsubishi Mirage? This owner's answer is yes, on Airtekk air suspension.

4 other Mitsubishi Mirage builds in the gallery run sizes like 15x6.5, 15x5, 18x10, 18x9.5 / 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Mitsubishi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2001 Mitsubishi Mirage: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mitsubishi Mirage

We sell this wheel in the closest size we carry: Work Meister M1 3p 4x100 16x10.5-5 A Disk Black is $760 each, about $3,040 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Mitsubishi Mirage wheel and tire package with free shipping.

Financing is available on every set, and 2001 Mitsubishi Mirage wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @datred_ck5a. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mitsubishi Mirage and size before you order, and add your own ride once it is done so the next owner can see what fits.