2019 Dodge Challenger

2019 Dodge Challenger wheel fitment at a glance

This 2019 Dodge Challenger is running REPLICA WHEELS RT-13 in Dodge Widebody Replica Chrome, staggered: 20x9 +15 up front and 20x10.5 +25 in the rear, wrapped in 245/45R20 front and 295/40R20 rear Nitto NT555 G2 tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, REPLICA WHEELS RT-13 on a Dodge Challenger, 20x9 +15 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

REPLICA WHEELS RT-13 20x9 +15 specs (staggered)

The wheels are 20-inch in diameter and 9 inches wide with a +15 offset up front, and 20-inch by 10.5 inches at +25 in the rear.

A +15 offset on a 9-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +25 offset on the 10.5-inch wheel keeps the rear in line with the front.

REPLICA WHEELS RT-13 20x9 +15 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/45R20 / 295/40R20 tires on 20x9 wheels

The tire size is 245/45R20 front and 295/40R20 rear: a 245 mm section width with a 45 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Nitto NT555 G2. We stock Lexani LX-TWENTY 245/45R20 at $123 each in this size, and other 245/45R20 tires through the 245/45R20 tire search.

Searching for 245/45R20 tires on a Dodge Challenger, or the right tire size for 20x9 +15 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Dodge Challenger is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, pulled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 20x9 +15 fit a Dodge Challenger?

Will REPLICA WHEELS RT-13 20x9 +15 fit a 2019 Dodge Challenger? This owner's answer is yes, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

REPLICA WHEELS RT-13 is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2019 Dodge Challenger in 20-inch sizes near +15 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.