2009 Dodge Challenger

2009 Dodge Challenger wheel fitment at a glance

This 2009 Dodge Challenger is running Rucci Rucci, staggered: 24x9 +15 up front and 24x10 +20 in the rear, wrapped in 255/45R24 front and 285/40R24 rear Nitto Invo tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, Rucci Rucci on a Dodge Challenger, 24x9 +15 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rucci Rucci 24x9 +15 specs (staggered)

The wheels are 24-inch in diameter and 9 inches wide with a +15 offset up front, and 24-inch by 10 inches at +20 in the rear.

A +15 offset on a 9-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +20 offset on the 10-inch wheel keeps the rear in line with the front.

Rucci Rucci 24x9 +15 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/45R24 / 285/40R24 tires on 24x9 wheels

The tire size is 255/45R24 front and 285/40R24 rear: a 255 mm section width with a 45 aspect ratio on the 24-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Nitto Invo. See every 255/45R24 tire we carry for this size.

Searching for 255/45R24 tires on a Dodge Challenger, or the right tire size for 24x9 +15 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Dodge Challenger is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 24x9 +15 fit a Dodge Challenger?

Will Rucci Rucci 24x9 +15 fit a 2009 Dodge Challenger? This owner's answer is yes, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2009 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

Rucci Rucci is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2009 Dodge Challenger in 24-inch sizes near +15 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2009 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.