2010 Dodge Challenger

2010 Dodge Challenger wheel fitment at a glance

This 2010 Dodge Challenger is running MB Wheels Old Skools in 20x8.5 +20 at all four corners, wrapped in 255/45R20 Hankook Ventus V12 EVO2 K120 tires.

It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, MB Wheels Old Skools on a Dodge Challenger, 20x8.5 +20 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

MB Wheels Old Skools 20x8.5 +20 specs

The wheels are 20-inch in diameter and 8.5 inches wide with a +20 offset.

A +20 offset on a 8.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

MB Wheels Old Skools 20x8.5 +20 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/45R20 tires on 20x8.5 wheels

The tire size is 255/45R20: a 255 mm section width with a 45 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Hankook Ventus V12 EVO2 K120. We stock Ironman IRON iMOVE Gen 3 AS 255/45ZR20XL at $135 each in this size, and other 255/45R20 tires through the 255/45R20 tire search.

Searching for 255/45R20 tires on a Dodge Challenger, or the right tire size for 20x8.5 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Dodge Challenger while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 20x8.5 +20 fit a Dodge Challenger?

Will MB Wheels Old Skools 20x8.5 +20 fit a 2010 Dodge Challenger? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2010 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

MB Wheels Old Skools is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2010 Dodge Challenger in 20-inch sizes near +20 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2010 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.