2012 Dodge Challenger

2012 Dodge Challenger wheel fitment at a glance

This 2012 Dodge Challenger is running CCW Wheels CCWheel SP550, staggered: 20x9.5 +20 up front and 20x11 +25 in the rear, wrapped in 275/35R20 front and 295/35R20 rear Nitto Invo tires.

It sits on KW V2 Suspension coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, CCW Wheels CCWheel SP550 on a Dodge Challenger, 20x9.5 +20 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

CCW Wheels CCWheel SP550 20x9.5 +20 specs (staggered)

The wheels are 20-inch in diameter and 9.5 inches wide with a +20 offset up front, and 20-inch by 11 inches at +25 in the rear.

A +20 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +25 offset on the 11-inch wheel keeps the rear in line with the front.

CCW Wheels CCWheel SP550 20x9.5 +20 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

275/35R20 / 295/35R20 tires on 20x9.5 wheels

The tire size is 275/35R20 front and 295/35R20 rear: a 275 mm section width with a 35 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Nitto Invo. We stock Arroyo Grand Sport AS 275/35ZR20 at $134 each in this size, and other 275/35R20 tires through the 275/35R20 tire search.

Searching for 275/35R20 tires on a Dodge Challenger, or the right tire size for 20x9.5 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on KW V2 Suspension coilovers, which lets the owner dial in ride height and camber to clear 20x9.5 +20 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 20x9.5 +20 fit a Dodge Challenger?

Will CCW Wheels CCWheel SP550 20x9.5 +20 fit a 2012 Dodge Challenger? This owner's answer is yes, on KW V2 Suspension coilovers, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2012 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

CCW Wheels CCWheel SP550 is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2012 Dodge Challenger in 20-inch sizes near +20 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2012 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.