2019 Dodge Challenger

2019 Dodge Challenger wheel fitment at a glance

This 2019 Dodge Challenger is running Forgiato - Custom Forged Wheels FV1-FF, staggered: 22x11 +20 up front and 22x12 -9 in the rear, wrapped in 295/25R22 front and 335/25R22 rear Michelin Pilot Sport 4 S tires.

It sits on Eibach lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, Forgiato - Custom Forged Wheels FV1-FF on a Dodge Challenger, 22x11 +20 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgiato - Custom Forged Wheels FV1-FF 22x11 +20 specs (staggered)

The wheels are 22-inch in diameter and 11 inches wide with a +20 offset up front, and 22-inch by 12 inches at -9 in the rear.

A +20 offset on a 11-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -9 offset on the 12-inch wheel pushes the rear out further for the staggered look.

Forgiato - Custom Forged Wheels FV1-FF 22x11 +20 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

295/25R22 / 335/25R22 tires on 22x11 wheels

The tire size is 295/25R22 front and 335/25R22 rear: a 295 mm section width with a 25 aspect ratio on the 22-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Michelin Pilot Sport 4 S. We stock Versatyre CRX4000 295/25R22 97W - CRX40002204 at $133 each in this size, and other 295/25R22 tires through the 295/25R22 tire search.

Searching for 295/25R22 tires on a Dodge Challenger, or the right tire size for 22x11 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from Eibach lowering springs, the simplest way to close the fender gap on a Dodge Challenger while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 22x11 +20 fit a Dodge Challenger?

Will Forgiato - Custom Forged Wheels FV1-FF 22x11 +20 fit a 2019 Dodge Challenger? This owner's answer is yes, on Eibach lowering springs, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

Forgiato - Custom Forged Wheels FV1-FF is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2019 Dodge Challenger in 22-inch sizes near +20 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.