2020 Ford F-150

2020 Ford F-150 wheel fitment at a glance

This 2020 Ford F-150 is running Fuel Off-Road Wheels Off-Road Vector in 20x8 +0 at all four corners, wrapped in 315/60R20 Atlander Roverclaw MT I tires.

It sits on MaxTrac Suspension lift kit with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Ford F-150 wheel fitment, Fuel Off-Road Wheels Off-Road Vector on a Ford F-150, 20x8 +0 wheels on a F-150, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Fuel Off-Road Wheels Off-Road Vector 20x8 +0 specs

The wheels are 20-inch in diameter and 8 inches wide with a +0 offset.

A +0 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Fuel Off-Road Wheels Off-Road Vector 20x8 +0 on a Ford F-150 is a common F-150 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

315/60R20 tires on 20x8 wheels

The tire size is 315/60R20: a 315 mm section width with a 60 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Atlander Roverclaw MT I. We stock Radar RENEGADE R-7 315/60R20 at $393 each in this size, and other 315/60R20 tires through the 315/60R20 tire search.

Searching for 315/60R20 tires on a Ford F-150, or the right tire size for 20x8 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The truck is lifted with MaxTrac Suspension lift kit, which is what makes room for the 315/60R20 tires without trimming.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Ford F-150 comes down to the offset and width above; copy them and you get the same result.

Will 20x8 +0 fit a Ford F-150?

Will Fuel Off-Road Wheels Off-Road Vector 20x8 +0 fit a 2020 Ford F-150? This owner's answer is yes, on MaxTrac Suspension lift kit, with no rubbing.

6 other Ford F-150 builds in the gallery run sizes like 17x10, 20x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Ford builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Ford F-150: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Ford F-150

Fuel Off-Road Wheels Off-Road Vector is not something we carry today. For the same look on your F-150, browse wheels that fit the 2020 Ford F-150 in 20-inch sizes near +0 offset; the Ford F-150 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2020 Ford F-150 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Ford F-150 and size before you order, and add your own ride once it is done so the next owner can see what fits.