Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Work Wheels Equip 01 15x8.5 -9 Toyo Proxes TR-1 195/45R15 Stock suspension Flush stance
1989 Mazda MX-6
This 1989 Mazda MX-6 is running Work Wheels Equip 01 in 15x8.5 -9 at all four corners, wrapped in 195/45R15 Toyo Proxes TR-1 tires.
It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.
If you are searching for Mazda MX-6 wheel fitment, Work Wheels Equip 01 on a Mazda MX-6, 15x8.5 -9 wheels on a MX-6, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 15-inch in diameter and 8.5 inches wide with a -9 offset, in the 4x100 bolt pattern the Mazda MX-6 uses.
A -9 offset on a 8.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.
Work Wheels Equip 01 15x8.5 -9 on a Mazda MX-6 is a common MX-6 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 195/45R15: a 195 mm section width with a 45 aspect ratio on the 15-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).
The owner chose Toyo Proxes TR-1. We stock Forceum D850 195/45R15 at $89 each in this size, and other 195/45R15 tires through the 195/45R15 tire search.
Searching for 195/45R15 tires on a Mazda MX-6, or the right tire size for 15x8.5 -9 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
This Mazda MX-6 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.
No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.
Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda MX-6 comes down to the offset and width above; copy them and you get the same result.
Will Work Wheels Equip 01 15x8.5 -9 fit a 1989 Mazda MX-6? This owner's answer is yes, with no rubbing.
2 related builds run sizes like 15x9.5, 15x9, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.
Our fitment guarantee covers wheels bought through wheels that fit the 1989 Mazda MX-6: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
We sell this exact wheel: Equip 01 Black Polish 4x100 15x8.5 -9 is $650 each, about $2,600 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Mazda MX-6 wheel and tire package with free shipping.
Financing is available on every set, and 1989 Mazda MX-6 wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda MX-6 and size before you order, and add your own ride once it is done so the next owner can see what fits.
