2022 Toyota GR86

2022 Toyota GR86 wheel fitment at a glance

This 2022 Toyota GR86 is running Work Wheels Meister in 18x8 +73 at all four corners, wrapped in 205/40R18 accelera phi-r tires.

It sits on Air Lift Performance air suspension with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Toyota GR86 wheel fitment, Work Wheels Meister on a Toyota GR86, 18x8 +73 wheels on a GR86, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister 18x8 +73 specs

The wheels are 18-inch in diameter and 8 inches wide with a +73 offset, in the 5x100 bolt pattern the Toyota GR86 uses.

A +73 offset on a 8-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels Meister 18x8 +73 on a Toyota GR86 is a common GR86 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

205/40R18 tires on 18x8 wheels

The tire size is 205/40R18: a 205 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose accelera phi-r. We stock Kumho Ecsta Sport PS72 205/40R18XL 86Y - 2362833 at $180 each in this size, and other 205/40R18 tires through the 205/40R18 tire search.

Searching for 205/40R18 tires on a Toyota GR86, or the right tire size for 18x8 +73 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Air Lift Performance air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, 25mm spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Toyota GR86 comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +73 fit a Toyota GR86?

Will Work Wheels Meister 18x8 +73 fit a 2022 Toyota GR86? This owner's answer is yes, on Air Lift Performance air suspension, with no rubbing.

6 other Toyota GR86 builds in the gallery run sizes like 18x8.5, 18x9.5, 18x10, 17x8, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2022 Toyota GR86: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota GR86

We sell this wheel in the closest size we carry: Work Meister S1 3P 5x100 18x8+68 O Disk Black is $970 each, about $3,880 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Toyota GR86 wheel and tire package with free shipping.

Financing is available on every set, and 2022 Toyota GR86 wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @silver.surfaa. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota GR86 and size before you order, and add your own ride once it is done so the next owner can see what fits.