1994 Mitsubishi 3000GT

1994 Mitsubishi 3000GT wheel fitment at a glance

This 1994 Mitsubishi 3000GT is running GMR EVOKE, staggered: 18x10 +37 up front and 18x10.5 +31 in the rear, wrapped in 225/40R18 Lexani Lxuhp 207 tires.

It sits on SILVERS COILOVERS coilovers with a hellaflush stance, meaning the wheel face sits at or just past the fender, the most aggressive look.

If you are searching for Mitsubishi 3000GT wheel fitment, GMR EVOKE on a Mitsubishi 3000GT, 18x10 +37 wheels on a 3000GT, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

GMR EVOKE 18x10 +37 specs (staggered)

The wheels are 18-inch in diameter and 10 inches wide with a +37 offset up front, and 18-inch by 10.5 inches at +31 in the rear.

A +37 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +31 offset on the 10.5-inch wheel pushes the rear out further for the staggered look.

GMR EVOKE 18x10 +37 on a Mitsubishi 3000GT is a common 3000GT question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/40R18 tires on 18x10 wheels

The tire size is 225/40R18: a 225 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Lexani Lxuhp 207. We stock Ironman IRON iMOVE Gen 3 AS 225/40ZR18XL at $89 each in this size, and other 225/40R18 tires through the 225/40R18 tire search.

Searching for 225/40R18 tires on a Mitsubishi 3000GT, or the right tire size for 18x10 +37 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on SILVERS COILOVERS coilovers, which lets the owner dial in ride height and camber to clear 18x10 +37 and get the hellaflush look.

A slight rub at full lock front and no rubbing rear, 25mm spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: hellaflush. The wheel face sits at or just past the fender, the most aggressive look. Flush fitment on a Mitsubishi 3000GT comes down to the offset and width above; copy them and you get the same result.

Will 18x10 +37 fit a Mitsubishi 3000GT?

Will GMR EVOKE 18x10 +37 fit a 1994 Mitsubishi 3000GT? This owner's answer is yes, on SILVERS COILOVERS coilovers.

1 other Mitsubishi 3000GT build in the gallery runs sizes like 18x9, 19x11, so you can compare offsets, tire sizes and suspension before you order. See all Mitsubishi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mitsubishi 3000GT: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mitsubishi 3000GT

GMR EVOKE is not something we carry today. For the same look on your 3000GT, browse wheels that fit the 1994 Mitsubishi 3000GT in 18-inch sizes near +37 offset; the Mitsubishi 3000GT wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1994 Mitsubishi 3000GT wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @Pxredrew. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mitsubishi 3000GT and size before you order, and add your own ride once it is done so the next owner can see what fits.