2000 Chevrolet Camaro

2000 Chevrolet Camaro wheel fitment at a glance

This 2000 Chevrolet Camaro is running Budnik Wheels Gasser, staggered: 18x8 +0 up front and 18x10 +25 in the rear, wrapped in 255/40R18 front and 275/45R18 rear Michelin Pilot Sport 4 S tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Chevrolet Camaro wheel fitment, Budnik Wheels Gasser on a Chevrolet Camaro, 18x8 +0 wheels on a Camaro, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Budnik Wheels Gasser 18x8 +0 specs (staggered)

The wheels are 18-inch in diameter and 8 inches wide with a +0 offset up front, and 18-inch by 10 inches at +25 in the rear.

A +0 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +25 offset on the 10-inch wheel keeps the rear in line with the front.

Budnik Wheels Gasser 18x8 +0 on a Chevrolet Camaro is a common Camaro question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/40R18 / 275/45R18 tires on 18x8 wheels

The tire size is 255/40R18 front and 275/45R18 rear: a 255 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Michelin Pilot Sport 4 S. We stock Lexani LX-TWENTY 255/40R18 at $104 each in this size, and other 255/40R18 tires through the 255/40R18 tire search.

Searching for 255/40R18 tires on a Chevrolet Camaro, or the right tire size for 18x8 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Chevrolet Camaro is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Chevrolet Camaro comes down to the offset and width above; copy them and you get the same result.

Will 18x8 +0 fit a Chevrolet Camaro?

Will Budnik Wheels Gasser 18x8 +0 fit a 2000 Chevrolet Camaro? This owner's answer is yes, with no rubbing.

6 other Chevrolet Camaro builds in the gallery run sizes like 19x10, 17x8.5 / 18x9.5, 17x9, 16x8.5, 16x8, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2000 Chevrolet Camaro: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Camaro

Budnik Wheels Gasser is not something we carry today. For the same look on your Camaro, browse wheels that fit the 2000 Chevrolet Camaro in 18-inch sizes near +0 offset; the Chevrolet Camaro wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2000 Chevrolet Camaro wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Camaro and size before you order, and add your own ride once it is done so the next owner can see what fits.