2006 Porsche 911

2006 Porsche 911 wheel fitment at a glance

This 2006 Porsche 911 is running ESM Wheels ESM-F04 Forged, staggered: 18x10.5 +31 up front and 18x13 +43 in the rear, wrapped in 275/35R18 front and 335/30R18 rear Toyo Proxes R888R tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Porsche 911 wheel fitment, ESM Wheels ESM-F04 Forged on a Porsche 911, 18x10.5 +31 wheels on a 911, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

ESM Wheels ESM-F04 Forged 18x10.5 +31 specs (staggered)

The wheels are 18-inch in diameter and 10.5 inches wide with a +31 offset up front, and 18-inch by 13 inches at +43 in the rear.

A +31 offset on a 10.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +43 offset on the 13-inch wheel keeps the rear in line with the front.

ESM Wheels ESM-F04 Forged 18x10.5 +31 on a Porsche 911 is a common 911 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

275/35R18 / 335/30R18 tires on 18x10.5 wheels

The tire size is 275/35R18 front and 335/30R18 rear: a 275 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Toyo Proxes R888R. We stock General G-Max RS 275/35ZR18 95Y - 15492880000 at $242 each in this size, and other 275/35R18 tires through the 275/35R18 tire search.

Searching for 275/35R18 tires on a Porsche 911, or the right tire size for 18x10.5 +31 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Porsche 911 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Porsche 911 comes down to the offset and width above; copy them and you get the same result.

Will 18x10.5 +31 fit a Porsche 911?

Will ESM Wheels ESM-F04 Forged 18x10.5 +31 fit a 2006 Porsche 911? This owner's answer is yes, with no rubbing.

6 other Porsche 911 builds in the gallery run sizes like 20x9 / 20x12, 19x8.5 / 19x11, 19x8.5 / 19x11.5, 19x8.5 / 19x12, so you can compare offsets, tire sizes and suspension before you order. See all Porsche builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2006 Porsche 911: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Porsche 911

ESM Wheels ESM-F04 Forged is not something we carry today. For the same look on your 911, browse wheels that fit the 2006 Porsche 911 in 18-inch sizes near +31 offset; the Porsche 911 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2006 Porsche 911 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Porsche 911 and size before you order, and add your own ride once it is done so the next owner can see what fits.