2006 Porsche 911

2006 Porsche 911 wheel fitment at a glance

This 2006 Porsche 911 is running HRE Wheels Matte Bronze Flow Form FF1, staggered: 18x8.5 +55 up front and 18x11 +60 in the rear, wrapped in 235/40R18 front and 285/35R18 rear Michelin Pilot Sport 4 S tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Porsche 911 wheel fitment, HRE Wheels Matte Bronze Flow Form FF1 on a Porsche 911, 18x8.5 +55 wheels on a 911, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

HRE Wheels Matte Bronze Flow Form FF1 18x8.5 +55 specs (staggered)

The wheels are 18-inch in diameter and 8.5 inches wide with a +55 offset up front, and 18-inch by 11 inches at +60 in the rear.

A +55 offset on a 8.5-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +60 offset on the 11-inch wheel keeps the rear in line with the front.

HRE Wheels Matte Bronze Flow Form FF1 18x8.5 +55 on a Porsche 911 is a common 911 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/40R18 / 285/35R18 tires on 18x8.5 wheels

The tire size is 235/40R18 front and 285/35R18 rear: a 235 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Michelin Pilot Sport 4 S. We stock Lexani LXUHP-207 235/40R18 at $86 each in this size, and other 235/40R18 tires through the 235/40R18 tire search.

Searching for 235/40R18 tires on a Porsche 911, or the right tire size for 18x8.5 +55 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x8.5 +55 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Porsche 911 comes down to the offset and width above; copy them and you get the same result.

Will 18x8.5 +55 fit a Porsche 911?

Will HRE Wheels Matte Bronze Flow Form FF1 18x8.5 +55 fit a 2006 Porsche 911? This owner's answer is yes, on coilovers, with no rubbing.

6 other Porsche 911 builds in the gallery run sizes like 20x9 / 20x12, 19x8.5 / 19x11, 19x8.5 / 19x11.5, 19x8.5 / 19x12, so you can compare offsets, tire sizes and suspension before you order. See all Porsche builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2006 Porsche 911: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Porsche 911

HRE Wheels Matte Bronze Flow Form FF1 is not something we carry today. For the same look on your 911, browse wheels that fit the 2006 Porsche 911 in 18-inch sizes near +55 offset; the Porsche 911 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2006 Porsche 911 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Porsche 911 and size before you order, and add your own ride once it is done so the next owner can see what fits.