2008 Porsche 911

2008 Porsche 911 wheel fitment at a glance

This 2008 Porsche 911 is running BC Forged NA MLE-81 Royal Gold, staggered: 19x9 +45 up front and 18x12 +42 in the rear, wrapped in 235/35R19 front and 305/30R18 rear Continental ExtremeContact Sport 02 tires.

It sits on BC Racing coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Porsche 911 wheel fitment, BC Forged NA MLE-81 Royal Gold on a Porsche 911, 19x9 +45 wheels on a 911, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

BC Forged NA MLE-81 Royal Gold 19x9 +45 specs (staggered)

The wheels are 19-inch in diameter and 9 inches wide with a +45 offset up front, and 18-inch by 12 inches at +42 in the rear.

A +45 offset on a 9-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +42 offset on the 12-inch wheel pushes the rear out further for the staggered look.

BC Forged NA MLE-81 Royal Gold 19x9 +45 on a Porsche 911 is a common 911 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/35R19 / 305/30R18 tires on 19x9 wheels

The tire size is 235/35R19 front and 305/30R18 rear: a 235 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Continental ExtremeContact Sport 02. We stock Lexani LX-TWENTY 235/35R19 at $97 each in this size, and other 235/35R19 tires through the 235/35R19 tire search.

Searching for 235/35R19 tires on a Porsche 911, or the right tire size for 19x9 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on BC Racing coilovers, which lets the owner dial in ride height and camber to clear 19x9 +45 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Porsche 911 comes down to the offset and width above; copy them and you get the same result.

Will 19x9 +45 fit a Porsche 911?

Will BC Forged NA MLE-81 Royal Gold 19x9 +45 fit a 2008 Porsche 911? This owner's answer is yes, on BC Racing coilovers, with no rubbing.

6 other Porsche 911 builds in the gallery run sizes like 20x9 / 20x12, 19x8.5 / 19x11, 19x8.5 / 19x11.5, 19x8.5 / 19x12, so you can compare offsets, tire sizes and suspension before you order. See all Porsche builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2008 Porsche 911: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Porsche 911

BC Forged NA MLE-81 Royal Gold is not something we carry today. For the same look on your 911, browse wheels that fit the 2008 Porsche 911 in 19-inch sizes near +45 offset; the Porsche 911 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2008 Porsche 911 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Porsche 911 and size before you order, and add your own ride once it is done so the next owner can see what fits.