Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Work Wheels Meister S1 3P 18x9.5 +24 Nitto Neo Gen 225/40R18 Bc coils coilovers Flush stance
2010 Mazda 3
This 2010 Mazda 3 is running Work Wheels Meister S1 3P in 18x9.5 +24 at all four corners, wrapped in 225/40R18 Nitto Neo Gen tires.
It sits on Bc coils coilovers with a flush stance, meaning the wheel face lines up with the fender.
If you are searching for Mazda 3 wheel fitment, Work Wheels Meister S1 3P on a Mazda 3, 18x9.5 +24 wheels on a 3, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 18-inch in diameter and 9.5 inches wide with a +24 offset, in the 5x100 bolt pattern the Mazda 3 uses.
A +24 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.
Work Wheels Meister S1 3P 18x9.5 +24 on a Mazda 3 is a common 3 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 225/40R18: a 225 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).
The owner chose Nitto Neo Gen. We stock Ironman IRON iMOVE Gen 3 AS 225/40ZR18XL at $89 each in this size, and other 225/40R18 tires through the 225/40R18 tire search.
Searching for 225/40R18 tires on a Mazda 3, or the right tire size for 18x9.5 +24 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
The car is lowered on Bc coils coilovers, which lets the owner dial in ride height and camber to clear 18x9.5 +24 and get the flush look.
A slight rub at full lock, 25mm spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.
Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda 3 comes down to the offset and width above; copy them and you get the same result.
Will Work Wheels Meister S1 3P 18x9.5 +24 fit a 2010 Mazda 3? This owner's answer is yes, on Bc coils coilovers.
6 other Mazda 3 builds in the gallery run sizes like 19x8.5, 17x7.5, 18x8, 18x7.5, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2010 Mazda 3: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
We sell this exact wheel: Work Meister S1 3P 5x100 18x9.5+24 O Disk Black is $1,000 each, about $4,000 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Mazda 3 wheel and tire package with free shipping.
Financing is available on every set, and 2010 Mazda 3 wheels ship free when bought as a wheel and tire package.
Build and photos by @ms3dom_. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda 3 and size before you order, and add your own ride once it is done so the next owner can see what fits.
