2010 BMW 128i

2010 BMW 128i wheel fitment at a glance

This 2010 BMW 128i is running Linea Corse Wheels Corse Lemans, staggered: 19x8.5 +35 up front and 19x9.5 +40 in the rear, wrapped in 225/35R19 front and 255/30R19 rear Toyo Proxes T1R tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for BMW 128i wheel fitment, Linea Corse Wheels Corse Lemans on a BMW 128i, 19x8.5 +35 wheels on a 128i, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Linea Corse Wheels Corse Lemans 19x8.5 +35 specs (staggered)

The wheels are 19-inch in diameter and 8.5 inches wide with a +35 offset up front, and 19-inch by 9.5 inches at +40 in the rear.

A +35 offset on a 8.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +40 offset on the 9.5-inch wheel keeps the rear in line with the front.

Linea Corse Wheels Corse Lemans 19x8.5 +35 on a BMW 128i is a common 128i question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/35R19 / 255/30R19 tires on 19x8.5 wheels

The tire size is 225/35R19 front and 255/30R19 rear: a 225 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Toyo Proxes T1R. We stock Ironman IRON iMOVE Gen 3 AS 225/35ZR19XL at $101 each in this size, and other 225/35R19 tires through the 225/35R19 tire search.

Searching for 225/35R19 tires on a BMW 128i, or the right tire size for 19x8.5 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This BMW 128i is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

Some rubbing, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a BMW 128i comes down to the offset and width above; copy them and you get the same result.

Will 19x8.5 +35 fit a BMW 128i?

Will Linea Corse Wheels Corse Lemans 19x8.5 +35 fit a 2010 BMW 128i? This owner's answer is yes.

3 other BMW 128i builds in the gallery run sizes like 18x8.5, 18x8 / 18x9, 19x8, 19x8.5 / 19x9.5, 19x8.5 / 19x9, so you can compare offsets, tire sizes and suspension before you order. See all BMW builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2010 BMW 128i: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your BMW 128i

Linea Corse Wheels Corse Lemans is not something we carry today. For the same look on your 128i, browse wheels that fit the 2010 BMW 128i in 19-inch sizes near +35 offset; the BMW 128i wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2010 BMW 128i wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same BMW 128i and size before you order, and add your own ride once it is done so the next owner can see what fits.