2016 INFINITI Q50

2016 INFINITI Q50 wheel fitment at a glance

This 2016 INFINITI Q50 is running F1R Wheels F29 in 20x10 +38 at all four corners, wrapped in 255/35R20 Sailun ATREZZO SVA1 tires.

It sits on RSR lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for INFINITI Q50 wheel fitment, F1R Wheels F29 on a INFINITI Q50, 20x10 +38 wheels on a Q50, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

F1R Wheels F29 20x10 +38 specs

The wheels are 20-inch in diameter and 10 inches wide with a +38 offset.

A +38 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

F1R Wheels F29 20x10 +38 on a INFINITI Q50 is a common Q50 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R20 tires on 20x10 wheels

The tire size is 255/35R20: a 255 mm section width with a 35 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Sailun ATREZZO SVA1. We stock Lexani LX-TWENTY 255/35R20 at $117 each in this size, and other 255/35R20 tires through the 255/35R20 tire search.

Searching for 255/35R20 tires on a INFINITI Q50, or the right tire size for 20x10 +38 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from RSR lowering springs, the simplest way to close the fender gap on a INFINITI Q50 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a INFINITI Q50 comes down to the offset and width above; copy them and you get the same result.

Will 20x10 +38 fit a INFINITI Q50?

Will F1R Wheels F29 20x10 +38 fit a 2016 INFINITI Q50? This owner's answer is yes, on RSR lowering springs, with no rubbing.

6 other INFINITI Q50 builds in the gallery run sizes like 19x12, 18x10.5 / 18x11, 19x9, 19x8.5, 20x9.5 / 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 INFINITI Q50: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI Q50

F1R Wheels F29 is not something we carry today. For the same look on your Q50, browse wheels that fit the 2016 INFINITI Q50 in 20-inch sizes near +38 offset; the INFINITI Q50 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 INFINITI Q50 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI Q50 and size before you order, and add your own ride once it is done so the next owner can see what fits.