2017 INFINITI Q50

2017 INFINITI Q50 wheel fitment at a glance

This 2017 INFINITI Q50 is running Weds Wheels Lxz, staggered: 19x10 +4 up front and 19x11 +2 in the rear, wrapped in 225/35R19 front and 235/35R19 rear Achilles Sport 2 tires.

It sits on BC Racing coilovers with a poke stance, meaning the wheels stick out past the fender.

If you are searching for INFINITI Q50 wheel fitment, Weds Wheels Lxz on a INFINITI Q50, 19x10 +4 wheels on a Q50, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Weds Wheels Lxz 19x10 +4 specs (staggered)

The wheels are 19-inch in diameter and 10 inches wide with a +4 offset up front, and 19-inch by 11 inches at +2 in the rear.

A +4 offset on a 10-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +2 offset on the 11-inch wheel pushes the rear out further for the staggered look.

Weds Wheels Lxz 19x10 +4 on a INFINITI Q50 is a common Q50 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/35R19 / 235/35R19 tires on 19x10 wheels

The tire size is 225/35R19 front and 235/35R19 rear: a 225 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Achilles Sport 2. We stock Lionhart LH-Five 225/35R19 88W - LHST51935020 at $99 each in this size, and other 225/35R19 tires through the 225/35R19 tire search.

Searching for 225/35R19 tires on a INFINITI Q50, or the right tire size for 19x10 +4 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on BC Racing coilovers, which lets the owner dial in ride height and camber to clear 19x10 +4 and get the poke look.

Some rubbing, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a INFINITI Q50 comes down to the offset and width above; copy them and you get the same result.

Will 19x10 +4 fit a INFINITI Q50?

Will Weds Wheels Lxz 19x10 +4 fit a 2017 INFINITI Q50? This owner's answer is yes, on BC Racing coilovers.

6 other INFINITI Q50 builds in the gallery run sizes like 19x12, 18x10.5 / 18x11, 19x9, 19x8.5, 20x9.5 / 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2017 INFINITI Q50: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI Q50

Weds Wheels Lxz is not something we carry today. For the same look on your Q50, browse wheels that fit the 2017 INFINITI Q50 in 19-inch sizes near +4 offset; the INFINITI Q50 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2017 INFINITI Q50 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI Q50 and size before you order, and add your own ride once it is done so the next owner can see what fits.