1996 Mazda Miata

1996 Mazda Miata wheel fitment at a glance

This 1996 Mazda Miata is running Rota Wheels RB in 15x9 +0 at all four corners, wrapped in 195/50R15 Dunlop DIREZZA DZ101 tires.

It sits on BC Racing coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Mazda Miata wheel fitment, Rota Wheels RB on a Mazda Miata, 15x9 +0 wheels on a Miata, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rota Wheels RB 15x9 +0 specs

The wheels are 15-inch in diameter and 9 inches wide with a +0 offset.

A +0 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Rota Wheels RB 15x9 +0 on a Mazda Miata is a common Miata question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

195/50R15 tires on 15x9 wheels

The tire size is 195/50R15: a 195 mm section width with a 50 aspect ratio on the 15-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Dunlop DIREZZA DZ101. We stock Arroyo Grand Sport AS 195/50R15 at $84 each in this size, and other 195/50R15 tires through the 195/50R15 tire search.

Searching for 195/50R15 tires on a Mazda Miata, or the right tire size for 15x9 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on BC Racing coilovers, which lets the owner dial in ride height and camber to clear 15x9 +0 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Mazda Miata comes down to the offset and width above; copy them and you get the same result.

Will 15x9 +0 fit a Mazda Miata?

Will Rota Wheels RB 15x9 +0 fit a 1996 Mazda Miata? This owner's answer is yes, on BC Racing coilovers, with no rubbing.

6 other Mazda Miata builds in the gallery run sizes like 16x9.5, 15x8, 16x7, 16x8, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1996 Mazda Miata: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda Miata

Rota Wheels RB is not something we carry today. For the same look on your Miata, browse wheels that fit the 1996 Mazda Miata in 15-inch sizes near +0 offset; the Mazda Miata wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1996 Mazda Miata wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda Miata and size before you order, and add your own ride once it is done so the next owner can see what fits.