Do I Need Hub Centric Rings?

By THREEPIECE.US Published Nov 15th 2026
Editorial note: ThreePiece.us fitment guides are maintained by our wheel and tire fitment team.

You need hub centric rings when the center bore of the wheel is larger than the hub on your car, and you don't need them when the two are the same size. Most aftermarket wheels are bored larger than any one car's hub so the same wheel can fit several cars, which is why rings come up on almost every aftermarket set.

What the ring does

A hub centric ring is a thin plastic or aluminum ring that sits between the hub and the wheel and takes up the gap. Its job is to hold the wheel on center while you tighten the lug nuts. Konig, which makes wheels, puts it plainly on its tech page, where it calls the ring an alignment tool for bolting the wheel on and says that once the wheel is torqued down it's the lug nuts that hold everything.

That's also why a missing ring shows up as a vibration. Without the ring the wheel can be clamped a hair off center, and you'll feel that at highway speed even though the lugs are tight.

How to pick the size

A ring has two numbers. The outer number matches the center bore of the wheel, and the inner number matches the hub on your car. If the wheel has a 73.1 mm bore and your hub is 64.1 mm, you want a 73.1 to 64.1 ring, and you need four of them.

The wheel's bore is listed in its specs, and it's worth confirming it for the exact wheel you're buying because it varies by brand and model. The hub size comes from your car. Here's what the ring works out to on a wheel with a 73.1 mm bore, using the hub sizes from our fitment data.

Ring size for a wheel with a 73.1 mm center bore
VehicleHub sizeRing (outer to inner)
2019 Subaru BRZ56.1 mm73.1 to 56.1
2019 Volkswagen GTI57.1 mm73.1 to 57.1
2021 Toyota Camry60.1 mm73.1 to 60.1
2022 Honda Civic64.1 mm73.1 to 64.1
2022 Tesla Model 364.1 mm73.1 to 64.1
2022 Infiniti Q5066.1 mm73.1 to 66.1
2022 Mazda 367.1 mm73.1 to 67.1
2022 Ford Mustang70.6 mm73.1 to 70.6
2018 BMW M372.6 mm73.1 to 72.6

Hub size can change between generations of the same model, so look up your own year before you order. If you aren't sure what a number means, what is center bore explains it and shows how to measure.

Plastic or aluminum

Either one works. Konig's answer to whether the material matters is "not really". The company points out that metal rings tend to corrode, which can make the wheel hard to get off the hub later, and says it has seen plastic rings run on race cars for several seasons.

Putting them in

The ring goes between the hub and the wheel, so it's fitted before the wheel is hung. After that it's a normal install: start the lug nuts by hand and tighten them in a crisscross pattern to the torque in your owner's manual. There's more on that in how much torque lug nuts need.

Where to get them

We stock rings in the hubcentric rings section, and you'll also find them next to the lug nuts in Finish Your Installation Kit. If you tell us the wheel and the car, we'll tell you the size, so call or text 813-535-5801.

What do hub centric rings do?

They fill the gap between the hub on your car and a wheel with a larger center bore, so the wheel sits on center while you tighten the lug nuts. That keeps the wheel from being clamped slightly off center, which is what causes vibration.

What size hub centric rings do I need?

You need a ring whose outer size matches the wheel's center bore and whose inner size matches your car's hub. For a wheel with a 73.1 mm bore on a car with a 64.1 mm hub, that's a 73.1 to 64.1 ring.

Are plastic or aluminum hub centric rings better?

Either one works. Konig, a wheel manufacturer, says the material doesn't really matter, and notes that metal rings tend to corrode and can make the wheel harder to remove.

Free shipping on all wheel & tire packages

Shop wheels for your car

Pick your year, make and model and see the wheels that fit.