What Is Center Bore on a Wheel?

By THREEPIECE.US Published Nov 15th 2026
Editorial note: ThreePiece.us fitment guides are maintained by our wheel and tire fitment team.
What Is Center Bore on a Wheel?

Center bore is the diameter of the hole in the middle of the wheel, the one that slides over the hub on your car, and it's measured in millimeters. The bore in the wheel has to be the same size as your hub or larger, and when it's larger you fill the gap with hub centric rings.

You'll see it called hub bore as well. People tend to say center bore when they're talking about the wheel and hub bore or hub size when they're talking about the car, and it's the same measurement either way.

What Is Center Bore on a Wheel?

Why it matters

The hub on your car has a raised lip in the middle, and the wheel sits over that lip while you tighten the lugs. When the hole in the wheel matches the hub, the wheel centers itself as you bolt it on. When the hole is bigger, only the lug nuts are pulling the wheel into place while you tighten it, so it can end up slightly off center, and that's what you feel as a vibration at speed.

The three cases

Wheel center bore compared with the hub on the car
Wheel bore vs your hubWhat happensWhat to do
Same sizeThe wheel fits snug over the hub.Nothing. No rings needed.
Wheel bore is largerThe wheel goes on with a gap around the hub.Add hub centric rings that fill the gap.
Wheel bore is smallerThe wheel won't seat against the hub at all.That wheel doesn't fit your car.

The middle case is the normal one with aftermarket wheels. A wheel maker would rather cut one larger bore, often 73.1 mm, and let the same wheel go on a lot of different cars with the right rings, than make a separate wheel for every hub size.

Hub sizes on some popular cars and trucks

These come from the fitment data we use on our vehicle pages. Hub size can change between generations and sometimes between trims, so check your own year and model before you order rings.

Hub bore by vehicle
VehicleBolt patternHub bore
2022 Mazda MX-5 Miata4x10054.1 mm
2019 Subaru BRZ5x10056.1 mm
2019 Volkswagen GTI5x11257.1 mm
2021 Toyota Camry5x114.360.1 mm
2022 Honda Civic5x114.364.1 mm
2022 Tesla Model 35x114.364.1 mm
2022 Infiniti Q505x114.366.1 mm
2022 BMW 330i5x11266.6 mm
2022 Chevrolet Camaro5x12066.9 mm
2022 Mazda 35x114.367.1 mm
2022 Ford Mustang5x114.370.6 mm
2022 Dodge Challenger5x11571.6 mm
2022 Jeep Wrangler5x12771.6 mm
2018 BMW M35x12072.6 mm
2022 Ram 15006x139.777.8 mm
2021 Chevrolet Silverado 15006x139.778.1 mm
2022 Ford F-1506x13587.1 mm

How to measure it

On the wheel, turn it face down and measure straight across the hole at the back with a caliper. On the car, measure across the raised lip of the hub with the wheel off. Do it in millimeters and to one decimal place, because the common sizes sit close together and 66.1, 66.6 and 67.1 are three different hubs.

What to do next

If the wheels you want have a bigger bore than your hub, you need a set of rings, and this article on hub centric rings explains how to pick the size. We keep them in the hubcentric rings section. Center bore is one of four numbers a wheel has to get right, and what wheels fit my car covers the other three.

Does the center bore have to match exactly?

No. The wheel's center bore can be the same size as your hub or larger. If it's larger, hub centric rings fill the gap so the wheel still centers on the hub.

Can a wheel with a smaller center bore fit my car?

No. If the hole in the wheel is smaller than the hub, the wheel can't slide over the hub and sit flat against it, so it doesn't fit.

Is hub bore the same as center bore?

Yes, it's the same measurement. Center bore usually describes the hole in the wheel and hub bore usually describes the hub on the car that the hole fits over.

Free shipping on all wheel & tire packages

Shop wheels for your car

Pick your year, make and model and see the wheels that fit.