2017 Mazda MX-5-Miata Wheels and Rims

The ND-generation 2017 Mazda MX-5 Miata is the purest distillation of the lightweight, rear-drive roadster formula, and the right wheels are about saving grams, not chasing diameter. Every set here ships free, comes with verified fitment for your specific Miata, and financing is available so you can build the setup you actually want. Keep it light, keep it balanced, and the chassis rewards you on every back road.

2017 Mazda MX-5 Miata fitment specs

  • Bolt pattern: 4x100
  • Center bore: 54.1mm
  • OE wheel diameter: 16 to 17 inches
  • OE offset: +45
  • Setup: square (non-staggered), RWD convertible

Cross-shop everything in this pattern and shop all 4x100 wheels to see the full range that bolts up.

Recommended setups

  • Enkei for proven motorsport-bred lightweight wheels that let the ND do what it does best.
  • Konig for affordable, low-mass designs in true 16 and 17-inch Miata sizing.
  • Rotiform for a cleaner, flush street look if stance is your priority over the stopwatch.

Wheel & fitment guides

For more detail on how the platform evolved, read the 2024-2026 MX-5 Miata wheel fitment guide and the deep dive on every Miata generation ranked. Since the ND uses a 54.1mm bore, it's worth understanding hub-centric vs lug-centric centering before you order.

Ready to commit? See them on your MX-5 Miata in the visualizer, browse real owner builds in the gallery, and spec a mounted and balanced setup in the package builder.

Looking at other years? Compare the 2016, 2019, 2020, 2021, 2022, and 2023 pages, or head to the Mazda hub.

There are no products listed under this category.

The ND-generation 2017 Mazda MX-5 Miata is the purest distillation of the lightweight, rear-drive roadster formula, and the right wheels are about saving grams, not chasing diameter. Every set here ships free, comes with verified fitment for your specific Miata, and financing is available so you can build the setup you actually want. Keep it light, keep it balanced, and the chassis rewards you on every back road.

2017 Mazda MX-5 Miata fitment specs

  • Bolt pattern: 4x100
  • Center bore: 54.1mm
  • OE wheel diameter: 16 to 17 inches
  • OE offset: +45
  • Setup: square (non-staggered), RWD convertible

Cross-shop everything in this pattern and shop all 4x100 wheels to see the full range that bolts up.

Recommended setups

  • Enkei for proven motorsport-bred lightweight wheels that let the ND do what it does best.
  • Konig for affordable, low-mass designs in true 16 and 17-inch Miata sizing.
  • Rotiform for a cleaner, flush street look if stance is your priority over the stopwatch.

Wheel & fitment guides

For more detail on how the platform evolved, read the 2024-2026 MX-5 Miata wheel fitment guide and the deep dive on every Miata generation ranked. Since the ND uses a 54.1mm bore, it's worth understanding hub-centric vs lug-centric centering before you order.

Ready to commit? See them on your MX-5 Miata in the visualizer, browse real owner builds in the gallery, and spec a mounted and balanced setup in the package builder.

Looking at other years? Compare the 2016, 2019, 2020, 2021, 2022, and 2023 pages, or head to the Mazda hub.