2021 Mazda MX-5-Miata Wheels and Rims

Popular 4x100 wheels that fit the 2021 Mazda MX-5-Miata

In-stock and ready to ship in this vehicle's bolt pattern. See the full fitment-filtered selection below.

Shop all 4x100 wheels »

The ND-generation 2021 MX-5 Miata is the purest distillation of the lightweight roadster formula: small footprint, rear-wheel drive, and a chassis that rewards every gram you save at each corner. That makes wheel choice more than cosmetic on this car. We ship verified-fitment setups free, and financing is available so you can get the look and the weight savings without compromise. Here's how to get it right.

2021 Mazda MX-5 Miata fitment specs

  • Bolt pattern: 4x100
  • Center bore: 54.1mm
  • OE wheel diameter: 16 to 17 inches
  • OE offset: +45
  • Setup: square (non-staggered)
  • Drivetrain: RWD convertible

The 4x100 pattern opens up a deep catalog, so it's worth a moment to shop all 4x100 wheels and cross-shop everything that bolts up.

Recommended setups

  • Enkei for genuinely lightweight, track-bred designs that let the Miata's tiny mass work in your favor.
  • Konig for affordable, light, motorsport-flavored fitments in the right 4x100 sizing.
  • Rotiform for clean, flush stance if you're chasing a show-ready ND look.

Wheel & fitment guides

Even though this is an ND, the platform shares plenty with later cars, so the 2024-2026 MX-5 Miata wheel fitment guide is a useful reference for offsets and real photos, and the Miata generation history is a fun deep dive. If you're planning a track-focused alignment, learn how camber actually works before you finalize a setup.

Ready to commit? See them on your Miata in the visualizer, browse real customer builds in the gallery, then spec a mounted and balanced kit in the package builder.

Looking at other years? Compare the 2020, 2022, and 2023 MX-5, or explore the full Mazda hub.

There are no products listed under this category.

Popular 4x100 wheels that fit the 2021 Mazda MX-5-Miata

In-stock and ready to ship in this vehicle's bolt pattern. See the full fitment-filtered selection below.

Shop all 4x100 wheels »

The ND-generation 2021 MX-5 Miata is the purest distillation of the lightweight roadster formula: small footprint, rear-wheel drive, and a chassis that rewards every gram you save at each corner. That makes wheel choice more than cosmetic on this car. We ship verified-fitment setups free, and financing is available so you can get the look and the weight savings without compromise. Here's how to get it right.

2021 Mazda MX-5 Miata fitment specs

  • Bolt pattern: 4x100
  • Center bore: 54.1mm
  • OE wheel diameter: 16 to 17 inches
  • OE offset: +45
  • Setup: square (non-staggered)
  • Drivetrain: RWD convertible

The 4x100 pattern opens up a deep catalog, so it's worth a moment to shop all 4x100 wheels and cross-shop everything that bolts up.

Recommended setups

  • Enkei for genuinely lightweight, track-bred designs that let the Miata's tiny mass work in your favor.
  • Konig for affordable, light, motorsport-flavored fitments in the right 4x100 sizing.
  • Rotiform for clean, flush stance if you're chasing a show-ready ND look.

Wheel & fitment guides

Even though this is an ND, the platform shares plenty with later cars, so the 2024-2026 MX-5 Miata wheel fitment guide is a useful reference for offsets and real photos, and the Miata generation history is a fun deep dive. If you're planning a track-focused alignment, learn how camber actually works before you finalize a setup.

Ready to commit? See them on your Miata in the visualizer, browse real customer builds in the gallery, then spec a mounted and balanced kit in the package builder.

Looking at other years? Compare the 2020, 2022, and 2023 MX-5, or explore the full Mazda hub.