11501 results for '1982 Mazda 626 brakes'

For most NA Miatas, our pick is the Goodridge 25001 or the Russell 685500. Both cover every 1990-1997 car and swap the factory rubber hoses for stainless braided lines. If you own a 1995-1997, the Wil

For most daily drivers doing a full brake job, PowerStop wins. You get a bolt-in kit with hardware, a kit warranty of up to 3 years / 36,000 miles, and a one-time 60-day exchange if you hate it. EBC w

Yes, Brembo brakes are good. For a daily driver or a quick street car, Brembo's OE-replacement pads, rotors and kits are one of the safest calls you can make. Brembo builds the factory brakes on a lot

The fourth-gen Mazda 3 is one of those cars that punches way above its price class in the looks department, and it absolutely rewards a proper set of wheels. Mazda's design team gave it those long,

The 1988–1992 Mazda MX-6 GT Turbo is one of the last genuinely undervalued Japanese turbo coupes you can still buy without a bidding war. While MR2 Turbos and 240SXs have been priced into the stratosp

Yes, but you'll want a lift. On an FD, the third-gen RX-7, that doesn't mean a lift kit. It means giving the tire room to move: sensible ride height, rolled fender lips if you go low, and offsets clos

Yes. 255s bolt onto the FD with the right wheel width and offset. Keep the rim between 7.5 and 9 inches wide, the offset up near +45, and the tire about 25 inches tall, and you trade the skinny factor

Semi-metallic brake pads are the default recommendation at every parts counter in America, and for most enthusiasts, they're the wrong choice. Unless you're tracking your car in triple-digit heat or t

A big brake kit is worth it when your car or truck keeps running into the heat limits of its stock brakes. That means track days, repeated hard stops, and heavy rigs working hard. A BBK buys you fade

Most enthusiasts spending $4,000+ on big brake kits would see better lap times from a tire upgrade. The BBK industry sells the dream of "track-ready stopping power" but here's the reality: your stock

The quick answer: every 2003–2012 Mazda RX-8 uses a 5x114.3 bolt pattern, M12x1.5 lugs, and a 67.1mm center bore. This guide covers the sizes and offsets that fit, from stock-friendly setups to full 1

The Ford Mustang S550 is a platform that genuinely rewards brake upgrades. Whether you're running a GT on track days, pushing a GT350 harder than Ford intended, or building an Ecoboost for time attack