2016 INFINITI Q70

2016 INFINITI Q70 wheel fitment at a glance

This 2016 INFINITI Q70 is running Work CR2P, staggered: 20x10.5 -26 up front and 20x12 -40 in the rear, wrapped in 245/35R20 front and 275/30R20 rear tires.

It sits on stock suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for INFINITI Q70 wheel fitment, Work CR2P on a INFINITI Q70, 20x10.5 -26 wheels on a Q70, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work CR2P 20x10.5 -26 specs (staggered)

The wheels are 20-inch in diameter and 10.5 inches wide with a -26 offset up front, and 20-inch by 12 inches at -40 in the rear.

A -26 offset on a 10.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -40 offset on the 12-inch wheel pushes the rear out further for the staggered look.

Work CR2P 20x10.5 -26 on a INFINITI Q70 is a common Q70 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/35R20 / 275/30R20 tires on 20x10.5 wheels

The tire size is 245/35R20 front and 275/30R20 rear: a 245 mm section width with a 35 aspect ratio on the 20-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

We stock Arroyo Grand Sport AS 245/35ZR20 at $107 each in 245/35R20, and more 245/35R20 tires through the tire search.

Searching for 245/35R20 tires on a INFINITI Q70, or the right tire size for 20x10.5 -26 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This INFINITI Q70 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a INFINITI Q70 comes down to the offset and width above; copy them and you get the same result.

Will 20x10.5 -26 fit a INFINITI Q70?

Will Work CR2P 20x10.5 -26 fit a 2016 INFINITI Q70? This owner's answer is yes, with no rubbing.

6 other INFINITI Q70 builds in the gallery run sizes like 19x8.5 / 19x10, 19x9.5, 19x9 / 19x10, 19x9.5 / 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all INFINITI builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 INFINITI Q70: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your INFINITI Q70

Work CR2P is not something we carry today. For the same look on your Q70, browse wheels that fit the 2016 INFINITI Q70 in 20-inch sizes near -26 offset; the INFINITI Q70 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 INFINITI Q70 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same INFINITI Q70 and size before you order, and add your own ride once it is done so the next owner can see what fits.