Price Match Guarantee 
Free Shipping
Out of stock
Skyjacker 2.5In COM BXNONRDSLLTNOSH - G251LTD
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Skyjacker
SKU:
SKYG251LTD
|
- UPC:
- 803696272511
$450.23
Other Skyjacker kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- SKYG251LTD
- Manufacturer part number
- G251LTD
- UPC
- 803696272511
- Brand
- Skyjacker
- Part type
- Lift Kits
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
Installation guide (from Skyjacker)
Hosted by Skyjacker. Follow the maker's instructions and torque specs.
- Box size:
- 15.50 × 12.30 × 26.50 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Out of stock
-
Out of stock
-
Out of stock
Skyjacker specifically engineered a progressive variable rate coil spring, distinctively a 2-stage dual rate long travel coil. Spring rate progression is from a 1st Flex Rate to a 2nd Ride Rate.The 1st Flex Rate stage delivers a comfortable ride with the ability to flex for increased articulation. The flex rate expands during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount/bucket and the tires in contact with the terrain. The 2nd Ride Rate stage only engages after compression past the flex rate.Engineered to coordinate with the Gladiator's distinctive suspension handling characteristics, the rear coils are side specific. Designed to raise the rear 1 in. to gain a more level stance.Front Bump Stop Spacers bolt onto the axle bump pads and keep the suspension travel safely in check. Front and Rear Extended Length Sway Bar End Links allow full articulation as the suspension drops (full droop). These sway bar end links include Skyjacker installed pressed-in HD OEM style rubber bushings.Proper suspension geometry ensures the Electronic Stability Control (ESC) system functions within factory parameters.
2.5 in. Component Box With Dual Rate Long Travel Coil Springs.
2.5in.COM BX;NONR;DSL;LT;NOSH
- Delivers A Comfortable Ride/Flex For Increased Articulation
- More Aggressive Off-Road Stance With Comfort And Stability
- Extended Length Sway Bar End Links Allow Full Articulation
- Specifically Engineered Progressive Variable Rate Springs
- Allows Full Articulation As Suspension Drops [Full Droop]
- Aggressive Look/Unparalleled Performance/ Impressive Ride
- Works With OEM Electronic Stability Control [ESC] System
- Flex Stage/Ride Stage Dual Rate Long Travel Coil Springs
- Distinctive Improved Suspension Handling Characteristics
- Engineered To Maintain Proper OEM Suspension Geometry
- Straight Bolt-On/Direct Fit Simple Remove And Replace
- Achieves Ample Room to Put 33s Into Action
- Clearance Item:
- N
- LTL:
- N
- MPN:
- G251LTD
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Skyjacker
Skyjacker 2.5In COM BXNONRDSLLTNOSH - G251LTD
Skyjacker 2.5In COM BXNONRDSLLTNOSH - G251LTD FAQ
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Yes. Any change in ride height changes the alignment; set it once the kit is on and the truck has been driven a short distance.
The maker states the largest tire the kit is designed to clear; going larger can need trimming or more lift. Wider wheels with less backspacing also change what clears.
Taller lifts change the angles of the driveshaft and CV joints, and kits made for that height include the parts to correct them when needed. A leveling kit that raises the front a small amount usually does not.
A leveling kit raises the front to match the rear and keeps the stock springs and shocks, so the ride stays close to stock. Larger lifts with new springs change the ride more.
Some kits reuse the stock shocks and some include or call for longer ones; the Part details and the maker's guide on this page say which.
Trucks with headlight leveling, adaptive cruise or a forward camera may need those systems re-aimed after the height changes.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: lift kits
Before you start
- Read the maker's guide for the tire size it clears and whether longer shocks or driveline parts are called for.
- Book an alignment and, on trucks with cameras or adaptive cruise, a re-aim of those systems.
Do
- Torque every bolt to the maker's figure and re-check after the first drive.
- Align the truck once the height has settled.
Don't
- Don't run a larger tire than the kit is made for without checking the clearance.
- Don't skip the driveline parts the maker says a taller lift needs.