2013 Lexus GS300

2013 Lexus GS300 wheel fitment at a glance

This 2013 Lexus GS300 is running Work Schwert SC2, staggered: 20x8.5 +38 up front and 20x10 +45 in the rear, wrapped in 245/30R20 front and 285/25R20 rear tires.

It sits on Tanabe NF210 coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Lexus GS300 wheel fitment, Work Schwert SC2 on a Lexus GS300, 20x8.5 +38 wheels on a GS300, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Schwert SC2 20x8.5 +38 specs (staggered)

The wheels are 20-inch in diameter and 8.5 inches wide with a +38 offset up front, and 20-inch by 10 inches at +45 in the rear.

A +38 offset on a 8.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +45 offset on the 10-inch wheel keeps the rear in line with the front.

Work Schwert SC2 20x8.5 +38 on a Lexus GS300 is a common GS300 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/30R20 / 285/25R20 tires on 20x8.5 wheels

The tire size is 245/30R20 front and 285/25R20 rear: a 245 mm section width with a 30 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Venom Power Ragnarok GTS 245/30R20 at $105 each in 245/30R20, and more 245/30R20 tires through the tire search.

Searching for 245/30R20 tires on a Lexus GS300, or the right tire size for 20x8.5 +38 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on Tanabe NF210 coilovers, which lets the owner dial in ride height and camber to clear 20x8.5 +38 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Lexus GS300 comes down to the offset and width above; copy them and you get the same result.

Will 20x8.5 +38 fit a Lexus GS300?

Will Work Schwert SC2 20x8.5 +38 fit a 2013 Lexus GS300? This owner's answer is yes, on Tanabe NF210 coilovers, with no rubbing.

6 other Lexus GS300 builds in the gallery run sizes like 19x10 / 19x12, 18x9.5, 18x8, 19x10 / 19x11.5, 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Lexus builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2013 Lexus GS300: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Lexus GS300

Work Schwert SC2 is not something we carry today. For the same look on your GS300, browse wheels that fit the 2013 Lexus GS300 in 20-inch sizes near +38 offset; the Lexus GS300 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2013 Lexus GS300 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Lexus GS300 and size before you order, and add your own ride once it is done so the next owner can see what fits.