2017 Nissan GT-R

2017 Nissan GT-R wheel fitment at a glance

This 2017 Nissan GT-R is running BC Forged 20x11 ET10, staggered: 20x11 +10 up front and 20x13 +12 in the rear, wrapped in 285/35R20 tires.

It sits on lowering springs with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Nissan GT-R wheel fitment, BC Forged 20x11 ET10 on a Nissan GT-R, 20x11 +10 wheels on a GT-R, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

BC Forged 20x11 ET10 20x11 +10 specs (staggered)

The wheels are 20-inch in diameter and 11 inches wide with a +10 offset up front, and 20-inch by 13 inches at +12 in the rear.

A +10 offset on a 11-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +12 offset on the 13-inch wheel keeps the rear in line with the front.

BC Forged 20x11 ET10 20x11 +10 on a Nissan GT-R is a common GT-R question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

285/35R20 tires on 20x11 wheels

The tire size is 285/35R20: a 285 mm section width with a 35 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Arroyo Grand Sport AS 285/35ZR20 at $150 each in 285/35R20, and more 285/35R20 tires through the tire search.

Searching for 285/35R20 tires on a Nissan GT-R, or the right tire size for 20x11 +10 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Nissan GT-R while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Nissan GT-R comes down to the offset and width above; copy them and you get the same result.

Will 20x11 +10 fit a Nissan GT-R?

Will BC Forged 20x11 ET10 20x11 +10 fit a 2017 Nissan GT-R? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Nissan GT-R builds in the gallery run sizes like 21x11 / 21x12, 20x10.5, 20x11 / 20x12, 20x11 / 20x13, 20x10 / 20x12, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2017 Nissan GT-R: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan GT-R

BC Forged 20x11 ET10 is not something we carry today. For the same look on your GT-R, browse wheels that fit the 2017 Nissan GT-R in 20-inch sizes near +10 offset; the Nissan GT-R wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2017 Nissan GT-R wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan GT-R and size before you order, and add your own ride once it is done so the next owner can see what fits.