2015 Dodge Challenger

2015 Dodge Challenger wheel fitment at a glance

This 2015 Dodge Challenger is running Forgeline GA3 in 20x9 +35 at all four corners, wrapped in 315/30R20 tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Dodge Challenger wheel fitment, Forgeline GA3 on a Dodge Challenger, 20x9 +35 wheels on a Challenger, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgeline GA3 20x9 +35 specs

The wheels are 20-inch in diameter and 9 inches wide with a +35 offset.

A +35 offset on a 9-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Forgeline GA3 20x9 +35 on a Dodge Challenger is a common Challenger question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

315/30R20 tires on 20x9 wheels

The tire size is 315/30R20: a 315 mm section width with a 30 aspect ratio on the 20-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Pirelli P-Zero (PZ4) 315/30ZR20XL 104(Y) - 2869400 at $771 each in 315/30R20, and more 315/30R20 tires through the tire search.

Searching for 315/30R20 tires on a Dodge Challenger, or the right tire size for 20x9 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Dodge Challenger is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Dodge Challenger comes down to the offset and width above; copy them and you get the same result.

Will 20x9 +35 fit a Dodge Challenger?

Will Forgeline GA3 20x9 +35 fit a 2015 Dodge Challenger? This owner's answer is yes, with no rubbing.

6 other Dodge Challenger builds in the gallery run sizes like 20x12, 22x9 / 22x11, 18x9, 20x10.5 / 20x11.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Dodge builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2015 Dodge Challenger: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Dodge Challenger

Forgeline GA3 is not something we carry today. For the same look on your Challenger, browse wheels that fit the 2015 Dodge Challenger in 20-inch sizes near +35 offset; the Dodge Challenger wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2015 Dodge Challenger wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Dodge Challenger and size before you order, and add your own ride once it is done so the next owner can see what fits.