2008 Mazda RX-8

2008 Mazda RX-8 wheel fitment at a glance

This 2008 Mazda RX-8 is running ESR Wheels SR06 in 19x9.5 +22 at all four corners, wrapped in 225/35R19 Kumho Ecsta PA51 tires.

It sits on OZ Racing coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-8 wheel fitment, ESR Wheels SR06 on a Mazda RX-8, 19x9.5 +22 wheels on a RX-8, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

ESR Wheels SR06 19x9.5 +22 specs

The wheels are 19-inch in diameter and 9.5 inches wide with a +22 offset.

A +22 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

ESR Wheels SR06 19x9.5 +22 on a Mazda RX-8 is a common RX-8 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/35R19 tires on 19x9.5 wheels

The tire size is 225/35R19: a 225 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Kumho Ecsta PA51. We stock Lionhart LH-Five 225/35R19 88W - LHST51935020 at $99 each in this size, and other 225/35R19 tires through the 225/35R19 tire search.

Searching for 225/35R19 tires on a Mazda RX-8, or the right tire size for 19x9.5 +22 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on OZ Racing coilovers, which lets the owner dial in ride height and camber to clear 19x9.5 +22 and get the flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-8 comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +22 fit a Mazda RX-8?

Will ESR Wheels SR06 19x9.5 +22 fit a 2008 Mazda RX-8? This owner's answer is yes, on OZ Racing coilovers, with no rubbing.

6 other Mazda RX-8 builds in the gallery run sizes like 18x11.5 / 18x13.5, 18x9.5, 18x10.5, 17x10, 17x9, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2008 Mazda RX-8: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-8

ESR Wheels SR06 is not something we carry today. For the same look on your RX-8, browse wheels that fit the 2008 Mazda RX-8 in 19-inch sizes near +22 offset; the Mazda RX-8 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2008 Mazda RX-8 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-8 and size before you order, and add your own ride once it is done so the next owner can see what fits.